We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aircraft-aluminium projector ceiling mount with lateral shift coupling, sets unit five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PA700S-SLOTTED projector accessory

SKU CH-YWRK-QCJTW

Ceiling mount positions compatible ViewSonic projectors five inches down with 360-degree rotation and 1.5-inch lateral shift

  • TypeProjector Mounts
  • Precision fit for ViewSonic PA700 and PS502 series
  • Aircraft-grade 6061-T6 aluminum ensures rigid, lasting support
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 5-inch lateral shift centres the lens on off-centre ceilings
  • Sets projector roughly 5 inches from ceiling for low-profile install

Dedicated Fit for ViewSonic Projectors

This ceiling mount is engineered exclusively for ViewSonic PA700S, PA700W, PA700X, PS502W and PS502X models. The CNC-machined plate ensures precise alignment with the projector chassis, leaving adequate clearance for heat to escape during operation. It positions the unit approximately 5 inches from the ceiling surface for a clean, low-profile installation.

Ideal for Fixed-Ceiling Alignments

Installers who need to centre the lens on a screen that is offset from the mounting point will benefit from the 1-1/2 inch lateral shift coupling. The mount rotates 360 degrees and allows pitch and roll adjustment in any direction. It is not designed for drop or false ceilings, so builders working with suspended grid systems should look at alternative mounting hardware.

6061-T6 Aluminium Build with Full Kit

The entire assembly is machined from 6061-T6 aircraft-grade aluminium for structural rigidity. All necessary fasteners and detailed instructions are included, so no additional parts are required to complete the installation. The minimal plate coverage frees up space around the projector vents, helping maintain stable operating temperatures.

Highlights

  • Precision fit for ViewSonic PA700 and PS502 series
  • Aircraft-grade 6061-T6 aluminum ensures rigid, lasting support
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 5-inch lateral shift centres the lens on off-centre ceilings
  • Sets projector roughly 5 inches from ceiling for low-profile install

Specifications

TypeProjector Mounts

Questions about this item

Which ViewSonic projectors must I already own for this mount to fit?

It is built for the PA700S, PA700W, PA700X, PS502W and PS502X models; the CNC-machined plate will not fit any other projector.

Can I keep my existing ceiling hardware and still use the 360-degree rotation?

Yes, the Lateral Shift Coupling gives 1-1/2 inches of left/right adjustment so the lens can be centred even if the ceiling joists are off-centre.

How do I confirm the mount is holding the projector at the correct distance after installation?

The design positions the unit roughly 5 inches from the ceiling; measure that gap once the hardware is tightened to verify proper placement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.