We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable swivel arm, shown without projector

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PA505W Projector Accessory

SKU CH-V87X-MV0T8

Ceiling mount positions ViewSonic PA505W, PX705HD and PX725HD projectors four inches down with 360-degree swivel and ±35-degree tilt on a CNC-machined 6061-T6 aluminium plate

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aluminium plate ensures rigid, lasting support
  • 360° swivel with ±35° pitch and roll for flexible aiming
  • Model-specific design fits PA505W, PX705HD and PX725HD only
  • All hardware and clear instructions included for quick setup
  • Low 4-inch drop keeps projector close to ceiling

Projector Ceiling Mount for ViewSonic Models

This fixed ceiling mount is built for the ViewSonic PA505W, PX705HD and PX725HD projectors. It uses a CNC-machined 6061-T6 aluminium plate shaped to each chassis so the unit hangs securely with minimal coverage. All mounting hardware and illustrated instructions are supplied for drywall or wooden-beam installation. The projector sits roughly four inches from the ceiling surface.

Fixed Drop and Angular Limits

The bracket positions the projector at a set distance of about four inches and is not designed for drop or false ceilings. It provides 360-degree yaw rotation plus pitch and roll adjustment up to 35 degrees in any direction. Because the drop length cannot be changed, rooms that require a longer extension will need a different mounting solution.

Model-Specific Plate Fit

The mounting plate is cut only for the three ViewSonic models named above; it will not attach to any other projector. Buyers with a different make or model must select a mount engineered for that unit. The plate you receive may look different from the product photos but will match the listed projectors exactly.

Highlights

  • CNC-machined 6061-T6 aluminium plate ensures rigid, lasting support
  • 360° swivel with ±35° pitch and roll for flexible aiming
  • Model-specific design fits PA505W, PX705HD and PX725HD only
  • All hardware and clear instructions included for quick setup
  • Low 4-inch drop keeps projector close to ceiling

Specifications

TypeProjector Mounts

Questions about this item

Which ViewSonic models does the PA505W mount fit?

The mount is designed for the ViewSonic PA505W, PX705HD and PX725HD projectors only; it will not fit other models.

How much tilt and swivel does the mount provide once installed?

It allows a full 360 degree swivel plus pitch and roll adjustment of up to 35 degrees in any direction.

What ceiling types can the included hardware handle?

The supplied hardware works with drywall ceilings and wooden beams; it is not intended for drop or false ceilings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.