We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with 10 inch extension arm for ViewSonic projectors

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PA500S-MM-10EXT projector accessory

SKU CH-28FY-8FA6D

A ceiling mount that positions compatible ViewSonic projectors 10 inches down, built from 6061-T6 aluminium with 360-degree rotation and ±80° tilt

  • TypeProjector Mounts
  • Precise fit for ViewSonic PA500 and PA503 series projectors
  • 100% 6061-T6 aircraft-grade aluminium ensures lasting strength
  • 360° rotation plus ±80° tilt for flexible aiming
  • All mounting hardware and instructions included for quick setup
  • 10-inch extension positions projector away from ceiling

Precision Aircraft Aluminum Mount

This ceiling mount is built from 100 percent 6061-T6 aircraft aluminum and machined to fit ViewSonic PA500S, PA500X, PA503S, PA503W and PA503X projectors only. The CNC plate minimises coverage while preserving airflow around the unit. All mounting hardware and step-by-step instructions are included for a secure drywall or wooden beam installation.

Fixed 10 Inch Extension Upgrade

The bracket positions the projector approximately 10 inches below the ceiling, replacing universal mounts that rely on adjustable arms and generic plates. The fixed drop eliminates arm flex and reduces the number of moving parts that can loosen over time. It is worth choosing when the room layout matches this exact extension and the projector model is on the compatibility list.

Drywall or Beam Ceiling Constraint

The hardware kit is designed for solid drywall or wooden beam ceilings only and is not intended for drop or false ceiling grids. The joint allows 360 degree rotation with a maximum tilt of 80 degrees in any direction, but the 10 inch standoff cannot be altered. Buyers needing a shorter drop, a different projector fitment or a suspended ceiling solution must select another mount.

Highlights

  • Precise fit for ViewSonic PA500 and PA503 series projectors
  • 100% 6061-T6 aircraft-grade aluminium ensures lasting strength
  • 360° rotation plus ±80° tilt for flexible aiming
  • All mounting hardware and instructions included for quick setup
  • 10-inch extension positions projector away from ceiling

Specifications

TypeProjector Mounts

Questions about this item

What ceiling material and spacing does the 10-inch extension mount require?

The mount installs on drywall ceilings or wooden beams using the included hardware and positions the projector roughly 10 inches from the ceiling; it is not designed for drop or false ceilings.

How do I correctly set the 360-degree rotation and +/- 80-degree tilt during installation?

After securing the ceiling plate and projector plate with the supplied hardware, rotate the joint 360 degrees and pitch or roll up to 80 degrees in any direction, then tighten all locking knobs to lock the aim.

When should I inspect the 6061-T6 aluminum hardware and moving joints for wear?

Check the mounting bolts, tilt mechanism and rotation joints at least once a year — tighten any loosened fasteners and verify the projector remains level and secure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.