We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm extending 13 to 20 inches, lateral shift coupling, 360-degree rotation

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-PA403S-LAT-13 projector accessory

SKU CH-M84B-4SHV4

Telescoping ceiling mount fits ViewSonic PA403S PA503SP PA503XP PJD5351LS PX726HD models 13 to 20 inches down with 360-degree rotation and lateral shift

  • TypeProjector Mounts
  • Aircraft-grade 6061-T6 aluminium construction built to last
  • Telescoping extension adjusts projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll for flexible aiming
  • Lateral shift coupling centres lens when ceiling mount is off-centre
  • CNC-machined plate designed exclusively for listed ViewSonic models

Compatible Projector Models

This ceiling mount is engineered specifically for the ViewSonic PA403S PA503SP PA503XP PJD5351LS and PX726HD projectors. The CNC machined mounting plate ensures precise fitment using minimal projector coverage while leaving adequate space for heat dissipation. It is not intended for drop or false ceiling installations.

360 Degree Rotation and Lateral Shift

The mount offers full 360 degree rotation with pitch and roll adjustment in any direction. A Lateral Shift Coupling provides 1 1/2 inches of left and right adjustment to center the projector lens when the mounting surface is not perfectly aligned with the screen center.

Telescoping Extension Range

The telescoping extension sets the projector approximately 13 to 20 inches away from the ceiling in 1 inch increments. Construction uses 100 percent 6061-T6 aircraft grade aluminum for durability. All necessary hardware and detailed instructions are included for quick installation.

Highlights

  • Aircraft-grade 6061-T6 aluminium construction built to last
  • Telescoping extension adjusts projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll for flexible aiming
  • Lateral shift coupling centres lens when ceiling mount is off-centre
  • CNC-machined plate designed exclusively for listed ViewSonic models

Specifications

TypeProjector Mounts

Questions about this item

How do I install the VIEWSONIC-PA403S-LAT-13 mount and what step do people often miss?

Secure the CNC-machined 6061-T6 aluminium plate to the projector, attach the telescoping tube, then set the 13 to 20 inch extension in 1 inch increments; the step often missed is using the 1 1/2 inch lateral shift coupling to centre the lens when the ceiling joist is off-centre.

What maintenance or replacement will this mount need later?

The aircraft-grade aluminium construction and included hardware are designed to last without scheduled maintenance; only periodic checks that bolts remain tight after vibration or building movement are recommended.

What limit appears first under sustained use?

The 360 degree rotation, pitch and roll joints stay within their mechanical range, so the first practical limit is the fixed 13 to 20 inch drop range — if the ceiling height changes, the mount cannot extend beyond 20 inches.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.