We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with 10-inch extension arm for ViewSonic projectors

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-LSC651WU-MM-10EXT projector accessory

SKU CH-P04C-ECW8E

Ceiling mount fits ViewSonic LSC651WU, LSC700-4K, LSC701-4K and LSC730WU models with 10-inch extension, 360-degree rotation and 80-degree tilt from 6061-T6 aluminium

  • TypeProjector Mounts
  • Secure mounting with 100 % 6061-T6 aircraft-grade aluminium construction
  • Sets the projector 10 inches from the ceiling for optimal clearance
  • Full 360-degree rotation plus ±80° tilt for flexible aiming
  • CNC-machined plate engineered for ViewSonic LSC651WU LSC700-4K LSC701-4K LSC730WU only
  • All hardware and detailed instructions included for quick installation

Precision fit for ViewSonic projectors

This ceiling mount is engineered exclusively for ViewSonic LSC651WU, LSC700-4K, LSC701-4K and LSC730WU models. The CNC-machined mounting plate attaches directly to the projector's chassis without covering ventilation paths. Installers receive every bolt and spacer needed for wood or drywall ceilings, plus illustrated step-by-step instructions.

Solid aluminium structure with full articulation

The arm and plate are cut from 6061-T6 aircraft-grade aluminium, giving a rigid platform that resists flex over time. The joint rotates 360 degrees and tilts +/- 80 degrees so the image can be squared from almost any ceiling angle. Because the design leaves open space around the projector housing, heat escapes normally and fan noise is not amplified by the mount.

Fixed 10-inch drop from ceiling surface

This model positions the projector roughly 10 inches below the mounting surface and is not designed for suspended or drop-ceiling grids. Buyers with false-ceiling installations or projectors outside the four listed ViewSonic series will need a different mounting solution. The plate you receive may look different from product photos but will match the specified models exactly.

Highlights

  • Secure mounting with 100 % 6061-T6 aircraft-grade aluminium construction
  • Sets the projector 10 inches from the ceiling for optimal clearance
  • Full 360-degree rotation plus ±80° tilt for flexible aiming
  • CNC-machined plate engineered for ViewSonic LSC651WU LSC700-4K LSC701-4K LSC730WU only
  • All hardware and detailed instructions included for quick installation

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the 6061-T6 mounting plate to my ViewSonic LSC651WU, and which step is most often missed?

Bolt the CNC-machined plate to the projector using the included hardware, then secure the arm to a ceiling joist or drywall with the supplied fasteners; the step most often missed is confirming the joist location before drilling.

What part of this mount will need inspection or replacement after extended use?

Check the tilt-and-roll pivot bolts and the 360-degree rotation bearing periodically; tighten or replace them if movement develops play.

At what ceiling-to-projector distance does this mount position the lens, and what thermal limit appears first?

The mount holds the projector about 10 inches from the ceiling; the first limit under sustained use is heat buildup if the gap restricts the projector’s exhaust airflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.