Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct, LLC. VIEWSONIC-LS831WU-MM projector accessory
Ceiling mount positions a ViewSonic LS831WU projector about five inches down with 360-degree rotation and 80-degree tilt, machined from 6061-T6 aircraft aluminium and supplied with all hardware
- TypeProjector Mounts
- Designed for ViewSonic LS831WU for precise fitment
- CNC-machined 6061-T6 aircraft aluminum ensures durability
- 360-degree rotation with ±80° tilt for flexible positioning
- 5-inch ceiling offset allows proper heat dissipation
- All hardware and instructions included for quick setup
ViewSonic LS831WU Dedicated Mount
This ceiling mount is engineered exclusively for the ViewSonic LS831WU projector, ensuring a precise fit without covering vents or controls. The CNC-machined mounting plate attaches directly to the projector's chassis, leaving adequate space for heat dissipation. All required hardware and detailed instructions are included for installation on drywall or wooden beams. The unit is not intended for drop or false ceilings.
Aircraft-Grade Aluminium Construction
The mount is fabricated from 100% 6061-T6 aircraft aluminium, providing structural rigidity that resists flex during extended operation. This material choice supports the projector's weight continuously without creep, maintaining alignment through thermal cycles and building vibration. The fixed 5-inch drop positions the lens at a consistent height for stable image geometry over time.
360° Rotation With ±80° Tilt
Full 360-degree yaw combined with ±80-degree pitch and roll adjustment allows the installer to aim the image precisely from a single ceiling anchor point. This range replaces the need for multiple repositioning attempts or shims when the mounting location is offset from the screen centre. The adjustment is worth it when the ceiling joist layout forces an off-axis installation or when keystone correction alone cannot achieve a rectangular image.
Highlights
- Designed for ViewSonic LS831WU for precise fitment
- CNC-machined 6061-T6 aircraft aluminum ensures durability
- 360-degree rotation with ±80° tilt for flexible positioning
- 5-inch ceiling offset allows proper heat dissipation
- All hardware and instructions included for quick setup
Specifications
| Type | Projector Mounts |
|---|
Questions about this item
How much heat can escape around the 6061-T6 aluminium plate during all-day use?
The CNC-machined plate uses minimal projector coverage, leaving adequate space for heat to escape during continuous operation.
What tools or ceiling type must I already have to install this mount?
All necessary hardware is included for drywall or wooden-beam ceilings; detailed instructions are supplied for a quick installation.
Will the fixed 5-inch drop and 360-degree rotation work with my existing ViewSonic LS831WU?
Yes, the mount is designed specifically for the LS831WU, setting it approximately 5 inches from the ceiling with full 360-degree rotation and ±80-degree tilt.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
