We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aircraft aluminium projector ceiling mount plate and arm, silver finish

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-LS700HD-MM projector accessory

SKU CH-41CT-7QPMY

Ceiling mount positions compatible ViewSonic LS700 projectors five inches down with 360-degree rotation and ±80-degree tilt from 6061-T6 aluminium

  • TypeProjector Mounts
  • Precision CNC-machined plate fits ViewSonic LS700 series exactly
  • 100% 6061-T6 aircraft aluminium resists corrosion and flex
  • 360° rotation with ±80° tilt covers any viewing angle
  • Mounts projector 5 inches from ceiling for optimal airflow
  • All hardware and step-by-step instructions included for fast setup

VIEWSONIC LS700-Series Ceiling Mount

This aluminium ceiling mount is designed exclusively for the ViewSonic LS700-4K and LS700HD projectors. It positions the unit roughly five inches from the ceiling and includes every screw, bolt and bracket needed for a drywall or wooden-beam installation. Detailed instructions guide the process from unboxing to final alignment. The CNC-machined plate matches only the models named above.

Aircraft-Grade 6061-T6 Build and Range of Motion

The mounting plate is cut from 100% 6061-T6 aircraft aluminium for rigidity and corrosion resistance. Once secured, the arm rotates a full 360 degrees and tilts plus or minus 80 degrees in pitch and roll, letting you aim the image precisely without moving the ceiling anchor. Heat vents on the projector remain unobstructed by the minimal-coverage plate.

Fixed-Drop Installation for Solid Ceilings

The mount sets the projector at a constant five-inch drop, so it suits rooms with standard drywall or exposed wooden beams but is not intended for suspended or false-ceiling grids. No extension column or height-adjustment mechanism is supplied, so the ceiling-to-lens distance cannot be altered after fitting. Projector not included.

Highlights

  • Precision CNC-machined plate fits ViewSonic LS700 series exactly
  • 100% 6061-T6 aircraft aluminium resists corrosion and flex
  • 360° rotation with ±80° tilt covers any viewing angle
  • Mounts projector 5 inches from ceiling for optimal airflow
  • All hardware and step-by-step instructions included for fast setup

Specifications

TypeProjector Mounts

Questions about this item

Will the 5-inch drop from the ceiling leave enough room for my existing cable management tray?

The mount positions the projector roughly 5 inches below the ceiling surface; measure your tray depth against that gap to confirm clearance.

How can I verify the 6061-T6 plate is aligned correctly after installation?

Check that the projector sits level, the tilt mechanism moves smoothly through the full +/- 80 degree range, and the 360-degree rotation locks securely at your chosen angle.

Does the box include anchors for a concrete ceiling or only hardware for drywall and wood?

The supplied hardware covers drywall and wooden-beam installations; concrete anchors are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.