We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm extending 13 to 20 inches and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-LS625W-LAT-13 projector accessory

SKU CH-E0TX-Q42MA

Aircraft-aluminium ceiling mount positions ViewSonic LS625W and LS625X projectors 13 to 20 inches down with 360-degree rotation and lateral shift

  • TypeProjector Mounts
  • Aircraft-grade 6061-T6 aluminium ensures a rigid, long-lasting mount
  • Telescoping arm adjusts from 13 to 20 inches in 1-inch steps for flexible positioning
  • Lateral shift coupling provides 1-1/2 inches of side-to-side lens centring
  • 360-degree rotation plus pitch and roll allow full directional aiming
  • Custom CNC-machined plate fits ViewSonic LS625W and LS625X projectors only

Designed for ViewSonic LS625W and LS625X

This aluminium ceiling mount is built exclusively for the ViewSonic LS625W and LS625X projectors. The CNC-machined plate matches the mounting points of those models only, so it cannot be used with other projectors. It is intended for solid ceiling installations, not for drop or false ceilings.

Telescoping extension handles fixed distances

The pole adjusts in one-inch increments to position the projector between approximately 13 and 20 inches from the ceiling. A lateral shift coupling provides 1-1/2 inches of side-to-side movement to centre the lens when the mounting point is off-axis. The head rotates 360 degrees and can be pitched or rolled in any direction for precise image alignment.

Aircraft-grade aluminium construction

The mount is made from 100 percent 6061-T6 aircraft aluminium for rigidity and corrosion resistance. All installation hardware and detailed instructions are included in the box. The design leaves open space around the projector to allow heat to escape during operation.

Highlights

  • Aircraft-grade 6061-T6 aluminium ensures a rigid, long-lasting mount
  • Telescoping arm adjusts from 13 to 20 inches in 1-inch steps for flexible positioning
  • Lateral shift coupling provides 1-1/2 inches of side-to-side lens centring
  • 360-degree rotation plus pitch and roll allow full directional aiming
  • Custom CNC-machined plate fits ViewSonic LS625W and LS625X projectors only

Specifications

TypeProjector Mounts

Questions about this item

How much heat clearance does the aircraft-grade 6061-T6 aluminum plate leave around the ViewSonic LS625W?

The CNC-machined plate uses minimal projector coverage, leaving adequate space for heat to escape during all-day operation.

Does the box include every bolt and tool needed to mount the LS625X on a solid ceiling?

All necessary hardware and detailed instructions are included for quick installation on a standard ceiling surface.

Will the 13-to-20-inch telescoping range and 1.5-inch lateral shift let me center the LS625W lens if my joist is off-centre?

Yes, the extension adjusts in 1-inch increments and the lateral shift coupling provides 1-1/2 inches of left/right adjustment for precise lens alignment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.