We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with 10 inch extension arm

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. VIEWSONIC-LS620X-MM-10EXT projector accessory 10 inch extension

SKU CH-9QQM-8HZPE

A 10-inch extension mount positions a ViewSonic LS620X projector 10 inches from the ceiling with 360-degree rotation and up to 80-degree tilt, machined from 6061-T6 aircraft aluminum for a precise fit

  • TypeProjector Mounts
  • Designed specifically for ViewSonic LS620X projectors
  • 10 inch extension positions projector away from ceiling
  • 360 degree rotation plus 80 degree tilt for flexible aiming
  • CNC machined 6061-T6 aircraft aluminum construction for durability
  • All mounting hardware and instructions included for quick setup

Projector Mount for ViewSonic LS620X

This ceiling mount is designed exclusively for ViewSonic LS620X projector models. It attaches the projector securely to a drywall ceiling or wooden beam using the included hardware and detailed instructions. The unit is machined from 6061-T6 aircraft-grade aluminium for durability and precise fitment.

10-Inch Extension with 360-Degree Rotation

The mount positions the projector approximately 10 inches from the ceiling and allows full 360-degree rotation plus pitch and roll adjustment up to 80 degrees. This provides flexible aiming while keeping the projector clear of the ceiling surface. It is not intended for drop or false ceilings where clearance differs.

Model-Specific Plate and Complete Hardware Kit

The CNC-machined mounting plate matches only the LS620X series, so it cannot be used with other projector models even if they appear similar. All screws, brackets and installation instructions are supplied in the box, removing the need to source additional parts. Projector not included.

Highlights

  • Designed specifically for ViewSonic LS620X projectors
  • 10 inch extension positions projector away from ceiling
  • 360 degree rotation plus 80 degree tilt for flexible aiming
  • CNC machined 6061-T6 aircraft aluminum construction for durability
  • All mounting hardware and instructions included for quick setup

Specifications

TypeProjector Mounts

Questions about this item

Will the 10 inch extension leave enough room for my existing cable routing above the ceiling?

The mount positions the projector roughly 10 inches below the ceiling surface, so measure your plenum depth and cable trays to confirm clearance before installing.

How can I verify the mount is holding the LS620X at the correct angle after installation?

Use a level on the projector body and check that the tilt reads within the ±80 degree range; the 360 degree rotation should move freely without binding.

Does the box include the projector-specific mounting plate and all hardware for a drywall or beam ceiling?

Yes, the CNC machined 6061-T6 aluminum plate made for the LS620X and all required mounting hardware plus instructions are included; the projector itself is not.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.