We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable arm extending ten inches from ceiling plate, designed for Sharp XV-Z30000 projector

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. SHARP-XV-Z30000-MM-10EXT projector accessory

SKU CH-P0C4-8WDPP

Ceiling mount positions the Sharp XV-Z30000 projector 10 inches down with 360-degree rotation and ±80° tilt, machined from 6061-T6 aircraft aluminium for a precise, model-specific fit

  • TypeProjector Mounts
  • Designed for Sharp XV-Z30000 ensuring perfect fit
  • CNC-machined 6061-T6 aircraft aluminum built to last
  • 360-degree rotation plus 80-degree tilt for flexible aiming
  • 10-inch extension positions projector away from ceiling
  • All hardware and instructions included for quick installation

Sharp XV-Z30000 Ceiling Mount

This fixed-extension ceiling mount is engineered specifically for the Sharp XV-Z30000 projector. It positions the unit roughly 10 inches below the ceiling surface using 6061-T6 aircraft-grade aluminium construction. The CNC-machined mounting plate matches the projector footprint exactly, leaving ventilation paths clear. All installation hardware and step-by-step instructions are supplied for drywall or wooden-beam mounting.

10-Inch Extension Distance

The mount sets the projector approximately 10 inches from the ceiling, a single dimension that decides whether the image lands at the correct height in rooms with standard ceilings. If the screen geometry or room layout demands a different drop, this fixed-length model cannot accommodate it and an adjustable-extension mount would be required instead.

360-Degree Rotation and ±80° Tilt

Once secured to the ceiling, the assembly rotates a full 360 degrees and tilts up to 80 degrees in any direction, allowing precise image alignment without moving the ceiling anchor. The design is not intended for suspended or drop-ceiling grids, so a solid structural attachment point must be available directly above the desired projector location.

Highlights

  • Designed for Sharp XV-Z30000 ensuring perfect fit
  • CNC-machined 6061-T6 aircraft aluminum built to last
  • 360-degree rotation plus 80-degree tilt for flexible aiming
  • 10-inch extension positions projector away from ceiling
  • All hardware and instructions included for quick installation

Specifications

TypeProjector Mounts

Questions about this item

How far from the ceiling will the projector sit once the 10-inch extension is installed?

The mount positions the projector roughly 10 inches below the ceiling surface, giving a fixed drop for the Sharp XV-Z30000.

What does the 360-degree rotation and ±80-degree tilt actually allow when the mount is in place?

You can spin the projector a full 360 degrees and tilt it up or down 80 degrees for precise image alignment.

What ceiling types and hardware are required to mount this 6061-T6 aluminum bracket?

It includes all hardware for drywall or wooden-beam ceilings; it is not designed for drop or false ceilings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.