We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount plate with lateral shift arm, sets projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. SANYO-PLC-XU350-SLOTTED projector accessory

SKU CH-XD1X-ZPH74

Ceiling mount positions compatible Sanyo projectors five inches from the ceiling with 360-degree rotation, pitch, roll and 1.5-inch lateral shift, machined from 6061-T6 aircraft aluminium

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aircraft aluminium ensures a precise, rigid fit for the projector
  • 360-degree rotation plus pitch and roll adjustment lets you aim the image exactly where needed
  • 5-inch lateral shift coupling centres the lens even when the ceiling mount is off-centre
  • Sets the projector roughly 5 inches from the ceiling for a low-profile installation
  • All mounting hardware and detailed instructions included for a quick, straightforward setup

Compatible Sanyo Projector Models

This ceiling mount is built exclusively for the Sanyo PLC-XU350, PLC-XU350A, PLC-XU355 and PLC-XU355A projectors. The CNC-machined mounting plate ensures a precise fit for these units only. It is not a universal mount and will not attach to other projector models. Buyers with different hardware must look elsewhere for a compatible solution.

Construction and Mounting Offset

The bracket is fabricated from 100 percent 6061-T6 aircraft-grade aluminum for structural rigidity. It positions the projector roughly 5 inches below the ceiling surface. The design leaves open space around the chassis to allow heat to escape during operation. This fixed offset cannot be extended or shortened, so rooms needing a different drop length are not served by this unit.

Adjustment Range and Installation Limits

A Lateral Shift Coupling provides 1-1/2 inches of horizontal travel to centre the lens when the ceiling anchor is off-axis. The mount rotates 360 degrees and supports pitch and roll adjustments for image alignment. All required hardware and detailed instructions are supplied for a straightforward install. The kit is not rated for drop or false ceiling installations.

Highlights

  • CNC-machined 6061-T6 aircraft aluminium ensures a precise, rigid fit for the projector
  • 360-degree rotation plus pitch and roll adjustment lets you aim the image exactly where needed
  • 5-inch lateral shift coupling centres the lens even when the ceiling mount is off-centre
  • Sets the projector roughly 5 inches from the ceiling for a low-profile installation
  • All mounting hardware and detailed instructions included for a quick, straightforward setup

Specifications

TypeProjector Mounts

Questions about this item

Will the 5-inch drop from the ceiling block the exhaust vents on my PLC-XU355?

The mount positions the projector about 5 inches from the ceiling and is designed to leave adequate space for heat to escape from the Sanyo models listed.

How can I verify the lateral shift coupling is centred after I bolt the mount up?

The coupling provides 1-1/2 inches of left-right adjustment; centre the lens visually with the screen then tighten the locking hardware to hold the position.

Does the box contain every bolt and spacer needed for a concrete ceiling, or must I buy anchors separately?

All necessary hardware and detailed instructions are included for installation; the mount itself is made from 6061-T6 aircraft aluminium with a CNC-machined plate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.