We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with 10 inch extension arm for Sanyo projectors

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. SANYO-PLC-XC50-MM-10EXT projector accessory

SKU CH-3EMT-CVNT0

Ceiling mount for Sanyo PLC-XC50, XC50A, XC55 and XC56 projectors, machined from 6061-T6 aluminium with a 10-inch extension and 360-degree rotation plus 80-degree tilt

  • TypeProjector Mounts
  • Sets projector 10 inches from ceiling for optimal placement
  • 360-degree rotation plus ±80° tilt for flexible aiming
  • Aircraft-grade 6061-T6 aluminium construction ensures lasting strength
  • CNC-machined plate fits Sanyo PLC-XC50, XC50A, XC55, XC56 only
  • All hardware and detailed instructions included for quick setup

Sanyo-Specific Ceiling Mount

This aluminium ceiling bracket is engineered exclusively for the Sanyo PLC-XC50, PLC-XC50A, PLC-XC55 and PLC-XC56 projectors. The CNC-machined plate matches the mounting points on those models, leaving ventilation gaps clear and holding the unit roughly 10 inches below the ceiling surface.

Installers with listed Sanyo models

The mount suits technicians fitting one of the four named projectors onto a solid drywall or wooden beam ceiling. It does not suit drop-ceiling grids, nor will it fit any projector outside the specified Sanyo range; owners of other makes or unlisted models must seek a different bracket.

360° rotation with full tilt and roll

The joint rotates a full 360 degrees and tilts plus or minus 80 degrees, while also allowing roll adjustment for precise image alignment. All mounting hardware and step-by-step instructions are supplied, so the installer can secure the projector without sourcing extra fixings.

Highlights

  • Sets projector 10 inches from ceiling for optimal placement
  • 360-degree rotation plus ±80° tilt for flexible aiming
  • Aircraft-grade 6061-T6 aluminium construction ensures lasting strength
  • CNC-machined plate fits Sanyo PLC-XC50, XC50A, XC55, XC56 only
  • All hardware and detailed instructions included for quick setup

Specifications

TypeProjector Mounts

Questions about this item

What type of ceiling structure is required to install the SANYO-PLC-XC50-MM-10EXT mount?

The mount includes all necessary hardware for installation onto a drywall ceiling or wooden beam. It is not intended for drop or false ceilings.

Will the mount allow my Sanyo PLC-XC55 projector to rotate fully for image alignment?

Yes, the mount can be rotated 360 degrees and pitched or rolled in any direction, with a maximum tilt of +/- 80 degrees for flexible positioning.

How can I verify the projector is mounted at the correct distance from the ceiling after setup?

This mount style sets the projector approximately 10 inches away from the ceiling, so measure the gap to confirm it matches this extension length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.