We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling bracket with adjustable arms, 5 inch drop

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. Projector Accessory for ViewSonic PG800HD PG800W PG800X 5" drop

SKU CH-AWGV-66BFG

Ceiling mount positions compatible ViewSonic projectors five inches down with 360-degree rotation and up to 80-degree tilt.

  • TypeNot intended for drop/false ceilings.
  • Features100% Aircraft Aluminum (6061-T6) Construction. All the neces
  • Precise fit for ViewSonic PG800 series via CNC-machined plate
  • 100 % aircraft-grade 6061-T6 aluminium construction for rigidity
  • 360 ° rotation plus ±80 ° tilt for flexible aiming
  • 5-inch drop positions projector close to ceiling
  • All mounting hardware and instructions included for quick setup

Direct Ceiling Mount for ViewSonic PG800 Series

This aluminium mount positions compatible ViewSonic PG800HD, PG800W and PG800X projectors five inches below a solid ceiling. It is built from 6061-T6 aircraft-grade aluminium and machined to fit only the three models listed. The unit rotates 360 degrees and tilts up to 80 degrees in any direction for precise image alignment.

Included Hardware and Instructions

All mounting hardware for drywall or wooden-beam ceilings ships in the box along with detailed step-by-step instructions. No extra brackets, cables or adapters are supplied, so the installer must provide only basic tools. The custom plate leaves clearance around the projector vents to maintain proper airflow.

Straightforward Installation on Solid Ceilings

The mount attaches directly to drywall or timber using the supplied fixings and the pre-drilled CNC plate aligns with the projector’s own mounting points. It is not designed for suspended or false-ceiling grids, so installers with drop ceilings will need a different solution. Careful levelling during fitting avoids later image keystone correction.

Highlights

  • Precise fit for ViewSonic PG800 series via CNC-machined plate
  • 100 % aircraft-grade 6061-T6 aluminium construction for rigidity
  • 360 ° rotation plus ±80 ° tilt for flexible aiming
  • 5-inch drop positions projector close to ceiling
  • All mounting hardware and instructions included for quick setup

Specifications

Model5" drop from ceiling
TypeNot intended for drop/false ceilings.
Features100% Aircraft Aluminum (6061-T6) Construction. All the necessary hardware included. Detailed instructions for easy and quick installation. Sets the projector approximately 5 inches away from the ceiling. Max Tilt: +/- 80 degrees. FREE Domestic Shipping. 100% Money Back Guarantee. Lifetime Warranty. Actual mounting plate may differ from picture.

Questions about this item

Does the 6061-T6 aluminium mounting plate ever need replacement or periodic tightening?

The CNC-machined 6061-T6 aluminium plate is built for permanent installation; all hardware is supplied and no scheduled maintenance or plate replacement is required.

What is the maximum tilt angle before the mount hits its mechanical limit?

The mount provides a maximum tilt of ±80 degrees, which is the angular limit before the joint stops.

Will the 5-inch drop restrict airflow and cause the ViewSonic PG800 series projector to overheat during all-day use?

The design leaves open space around the projector for heat to escape, and the fixed 5-inch drop does not add active noise, heat or power draw.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.