Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct, LLC. projector accessory for Epson PowerLite L610W L615U 13-20" drop
Ceiling mount positions Epson PowerLite L610W or L615U projectors 13 to 20 inches below solid ceilings with 360-degree rotation and 1.5-inch lateral shift
- TypeNot intended for drop/false ceilings.
- Features100% Aircraft Aluminum (6061-T6) Construction. All the neces
- 360-degree rotation with pitch and roll adjusts the projector to any viewing angle
- 13 to 20 inch telescoping drop positions the lens at the needed height
- CNC-machined 6061-T6 aircraft aluminium mounting plate fits Epson PowerLite L610W and L615U precisely
- Lateral shift coupling centres the lens when the ceiling mount is off-centre
- Open plate design leaves space around the projector for heat to escape
Compatible Epson Models
This ceiling mount is designed specifically for the Epson PowerLite L610W and L615U projectors. The CNC-machined mounting plate ensures a precise fit using minimal projector coverage. It leaves adequate space around the unit for heat to escape during operation.
Installers Needing Lateral Alignment
The Lateral Shift Coupling provides 1-1/2 inches of left and right adjustment to centre the projector lens. This suits installations where the mounting surface is not perfectly aligned with the screen centre. It is not intended for drop or false ceilings so those projects require a different solution.
Build Integration And Clearance
The mount sets the projector approximately 13 to 20 inches from the ceiling using a telescoping extension. It rotates 360 degrees and can be pitched or rolled in any direction for image alignment. All necessary hardware and detailed instructions are included for installation.
Highlights
- 360-degree rotation with pitch and roll adjusts the projector to any viewing angle
- 13 to 20 inch telescoping drop positions the lens at the needed height
- CNC-machined 6061-T6 aircraft aluminium mounting plate fits Epson PowerLite L610W and L615U precisely
- Lateral shift coupling centres the lens when the ceiling mount is off-centre
- Open plate design leaves space around the projector for heat to escape
Specifications
| Model | 13" - 20" drop from ceiling |
|---|---|
| Type | Not intended for drop/false ceilings. |
| Features | 100% Aircraft Aluminum (6061-T6) Construction. All the necessary hardware included. Detailed instructions for easy and quick installation. Sets the projector approximately 13 - 20 inches from the ceiling (in 1 inch increments) depending on the telescoping extension setting. Max Tilt: +/- 80 degrees. Lateral Shift Coupling allows 1-1/2 inches of left/right lateral adjustment. FREE Domestic Shipping. 100% Money Back Guarantee. Lifetime Warranty. Actual mounting plate may differ from picture. |
Questions about this item
What ceiling type must I already have so this mount works as intended?
The mount is designed for solid ceilings only; it is not intended for drop or false ceilings, so you need a structural ceiling that can accept the included hardware.
Will the 13 to 20 inch drop range still let me align the lens with my existing screen centre?
Yes, the Lateral Shift Coupling provides 1-1/2 inches of left-right adjustment to centre the projector lens even if the ceiling joist is offset from the screen centre.
How can I confirm the mount is holding the projector at the correct angle after installation?
Verify the projector hangs level by checking that the mounting plate sits flush on the CNC-machined 6061-T6 aluminium surface and that the telescoping extension locks at your chosen 13 to 20 inch setting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



