Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct LLC Projector Accessory Compatible Eiki EK-450U 13-20in Drop 6061-T6 Aluminum
Ceiling mount for the Eiki EK-450U projector with 13–20 inch drop, 360-degree rotation, +/- 80-degree tilt and 6061-T6 aluminium construction
- TypeNot intended for drop/false ceilings.
- Features100% Aircraft Aluminum (6061-T6) Construction. All the neces
- Sets projector 13-20 inches from ceiling in one-inch increments
- 360-degree rotation with ±80° tilt for flexible aiming
- CNC-machined 6061-T6 aircraft aluminium mounting plate for precise fit
- 5-inch lateral shift coupling centres lens on off-centre mounts
- All installation hardware and detailed instructions included
Eiki EK-450U ceiling mount 13-20in drop
This aluminium ceiling mount is built specifically for the Eiki EK-450U projector. It positions the unit 13 to 20 inches below the ceiling in one-inch increments. The design suits installers who need a fixed drop on solid drywall or wooden beams. It is not intended for drop or false ceilings.
CNC plate hardware and lateral shift
A CNC-machined mounting plate matches the projector footprint and leaves room for heat to escape. All installation hardware and detailed instructions are included in the box. The Lateral Shift Coupling provides 1-1/2 inches of side-to-side adjustment to centre the lens when the ceiling anchor is off-centre. No extra parts are required to complete the job.
6061-T6 aluminium build and full articulation
The mount uses 100% 6061-T6 aircraft-grade aluminium for a rigid, lightweight structure. It rotates 360 degrees and tilts ±80 degrees so the image can be aimed precisely. The projector sits approximately 13 to 20 inches from the ceiling surface. This fixed-length column does not extend beyond that range.
Highlights
- Sets projector 13-20 inches from ceiling in one-inch increments
- 360-degree rotation with ±80° tilt for flexible aiming
- CNC-machined 6061-T6 aircraft aluminium mounting plate for precise fit
- 5-inch lateral shift coupling centres lens on off-centre mounts
- All installation hardware and detailed instructions included
Specifications
| Model | 13" - 20" drop from ceiling |
|---|---|
| Type | Not intended for drop/false ceilings. |
| Features | 100% Aircraft Aluminum (6061-T6) Construction. All the necessary hardware included. Detailed instructions for easy and quick installation. Sets the projector approximately 13 - 20 inches from the ceiling (in 1 inch increments) depending on the telescoping extension setting. Max Tilt: +/- 80 degrees. Lateral Shift Coupling allows 1-1/2 inches of left/right lateral adjustment. FREE Domestic Shipping. 100% Money Back Guarantee. Lifetime Warranty. Actual mounting plate may differ from picture. |
Questions about this item
Does the 6061-T6 aluminum mount need any periodic tightening or replacement parts over time?
The 6061-T6 aircraft-grade aluminum construction and included hardware are designed for permanent installation; no scheduled maintenance or replacement parts are required.
What is the maximum tilt angle before the projector becomes unstable on this mount?
The mount allows a maximum tilt of +/- 80 degrees; exceeding this range could compromise stability and is not supported by the design.
How much heat builds up around the projector when the mount is left in a fixed position all day?
The CNC-machined mounting plate uses minimal coverage, leaving ample space for the projector's own heat to escape during continuous operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible
$86.99
0.00100455BTC
In stock
