Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct, LLC. PANA-PT-AE700-LAT-13 projector accessory 13-20 inch extension
Telescoping extension positions the projector 13 to 20 inches from the ceiling with 360-degree rotation and lateral shift for precise alignment
- TypeProjector Mounts
- Telescopes 13 to 20 inches for flexible ceiling placement
- 100% 6061-T6 aircraft aluminium ensures rigid, lightweight strength
- 360-degree rotation plus pitch and roll for precise image alignment
- 5-inch lateral shift centres lens when mounting surface is off-centre
- CNC-machined plate fits Panasonic PT-AE700, AE700U, AE900 and AE900U models only
Dedicated Panasonic projector mount
This ceiling mount is engineered exclusively for the Panasonic PT-AE700 AE700U AE900 AE900U series. It replaces universal brackets with a CNC-machined 6061-T6 aluminium plate that matches the projector footprint and leaves clearance for heat exhaust. All mounting hardware and step-by-step instructions are supplied for a single-person installation.
Installers with offset ceilings or drop-tile
The built-in lateral-shift coupling provides 1-1/2 inches of side adjustment so the lens can be centred when the joist or anchor point sits off the screen centreline. Telescoping tubes set the projector 13 to 20 inches below the ceiling in 1 inch steps. The design is not rated for drop or false ceilings and will not fit any projector outside the four models named above.
13-20 inch telescoping range
The extension length is the single dimension that decides whether this mount reaches your screen height. If the finished ceiling-to-lens distance falls outside the 13 to 20 inch window, a different drop length is required.
Highlights
- Telescopes 13 to 20 inches for flexible ceiling placement
- 100% 6061-T6 aircraft aluminium ensures rigid, lightweight strength
- 360-degree rotation plus pitch and roll for precise image alignment
- 5-inch lateral shift centres lens when mounting surface is off-centre
- CNC-machined plate fits Panasonic PT-AE700, AE700U, AE900 and AE900U models only
Specifications
| Type | Projector Mounts |
|---|
Questions about this item
How do I install the PANA-PT-AE700-LAT-13 mount and which step is often missed?
Attach the CNC-machined 6061-T6 plate to your Panasonic PT-AE700, AE700U, AE900 or AE900U using the included hardware, then secure the telescoping column to a structural ceiling joist — not a drop-ceiling tile. The step people skip is verifying the joist can hold the load before drilling.
What maintenance or replacement will this mount need over time?
The aircraft-aluminium construction and stainless hardware are corrosion-resistant, so no scheduled maintenance is required. Only replace the mount if physical damage occurs or if you change to a projector model outside the listed Panasonic series.
What is the first limitation I will hit during sustained use?
The fixed 13-to-20-inch extension range sets the minimum and maximum drop from the ceiling. If the room layout later demands a shorter or longer drop, the mount itself cannot be adjusted beyond those limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



