We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount arm with a 10-inch extension tube and CNC-machined projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-ZH300UW-MM-10EXT 10in Extension Projector Accessory

SKU CH-E7T4-RWFRY

A 10-inch extension ceiling mount positions compatible Optoma projectors 10 inches from the ceiling with 360-degree rotation and 80-degree tilt using aircraft-grade 6061-T6 aluminum construction

  • TypeProjector Mounts
  • Sets projector 10 inches from ceiling with 10in extension
  • Rotates 360 degrees and tilts ±80 degrees for flexible aiming
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • Includes all hardware and instructions for quick installation
  • Designed exclusively for Optoma GT5500+ X319UST ZH300UW ZH400UST ZH400USTi models

Direct-fit ceiling mount for Optoma projectors

This aluminium extension arm positions compatible Optoma ultra-short-throw models approximately 10 inches below the ceiling surface. It is built for installers who need a rigid, model-specific bracket rather than a universal kit. The machined plate matches the mounting points of the GT5500+, X319UST, ZH300UW, ZH400UST and ZH400USTi without modification.

10-inch drop with 360-degree rotation

The arm sets the projector at a fixed 10-inch extension while allowing full 360-degree yaw and +/- 80-degree pitch for precise image alignment. CNC-machined 6061-T6 aluminium keeps deflection low even at the extremes of tilt. The design leaves clearance around the projector vents so heat can escape freely during long sessions.

Included hardware and instructions simplify

Every bolt, anchor and washer needed for wood or drywall ceilings ships in the box alongside step-by-step guidance. No extra trips to the hardware store are required. The plate you receive may look different from product photos but will only fit the Optoma models listed above. Projector not included.

Highlights

  • Sets projector 10 inches from ceiling with 10in extension
  • Rotates 360 degrees and tilts ±80 degrees for flexible aiming
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • Includes all hardware and instructions for quick installation
  • Designed exclusively for Optoma GT5500+ X319UST ZH300UW ZH400UST ZH400USTi models

Specifications

TypeProjector Mounts

Questions about this item

Will this 10-inch extension mount work with my existing Optoma ZH300UW projector?

Yes, the mount is designed specifically for the Optoma ZH300UW along with the GT5500+, X319UST, ZH400UST and ZH400USTi models.

How can I verify the mount is installed correctly after setup?

The projector should sit roughly 10 inches from the ceiling, rotate a full 360 degrees, and tilt within the +/- 80 degree range without obstruction.

Does the package contain every screw and bracket needed for a drywall or wooden-beam ceiling?

All necessary hardware and detailed instructions are included for drywall or wooden-beam installation; the projector itself is not supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.