We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling bracket with slotted plate and lateral shift arm

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-W331-SLOTTED projector accessory

SKU CH-6Y2M-C5JBC

Ceiling mount for Optoma projectors, machined from 6061-T6 aluminium with 360-degree rotation, pitch and roll adjustment, 1.5-inch lateral shift and a fixed 5-inch drop

  • TypeProjector Mounts
  • Precise projector fit using CNC-machined 6061-T6 aircraft aluminum plate
  • 360-degree rotation plus full pitch and roll adjustment for flexible aiming
  • 1-1/2 inch lateral shift coupling centers lens when ceiling is off-centre
  • Sets projector approximately 5 inches from ceiling for low-profile installation
  • All mounting hardware and detailed instructions included for quick setup

Optoma Projector Ceiling Mount

This precision-machined ceiling mount fits Optoma DS347, DS348, DW315, H114, S321, S331, S341 and W331 projectors. It is built from 6061-T6 aircraft aluminium and positions the unit approximately 5 inches from the ceiling. The mount provides 360-degree rotation with pitch and roll adjustment for accurate image alignment. It is designed for installers who need a model-specific fit rather than a universal bracket.

Installation and Common Issues

All required hardware and detailed instructions are included for straightforward assembly. The CNC-machined plate ensures precise hole alignment with the listed projectors. A lateral shift coupling allows 1-1/2 inches of left-right adjustment to centre the lens when the ceiling joist is off-axis. The mount is not intended for drop or false ceilings and the actual plate appearance may differ from product images.

Fixed Extension Constraints

The bracket sets the projector at a fixed 5-inch drop, so rooms requiring a shorter or longer extension will need a different solution. The lateral shift range is limited to 1-1/2 inches, which may not compensate for large structural misalignments. Buyers with projector models outside the specified Optoma series cannot use this mount. The design leaves open space around the chassis for heat dissipation but offers no vertical height adjustment.

Highlights

  • Precise projector fit using CNC-machined 6061-T6 aircraft aluminum plate
  • 360-degree rotation plus full pitch and roll adjustment for flexible aiming
  • 1-1/2 inch lateral shift coupling centers lens when ceiling is off-centre
  • Sets projector approximately 5 inches from ceiling for low-profile installation
  • All mounting hardware and detailed instructions included for quick setup

Specifications

TypeProjector Mounts

Questions about this item

How do I verify the mount holds the Optoma W331 securely after installation?

Confirm the CNC-machined 6061-T6 aluminium plate locks onto the W331 mounting points, the lateral shift coupling centres the lens within 1-1/2 inches, and the unit rotates 360 degrees with pitch and roll movement while sitting roughly 5 inches from the ceiling.

What hardware comes in the box and what must I supply for the Optoma DS347?

All necessary mounting hardware and detailed instructions are included for the DS347; you only need to provide ceiling anchors or lag bolts suitable for your ceiling structure, as the mount is not designed for drop or false ceilings.

Which Optoma models does the OPTOMA-W331-SLOTTED plate fit?

The plate is precision-machined for Optoma DS347, DS348, DW315, H114, S321, S331, S341 and W331 only; it will not fit any other projector make or model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.