We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping arm extending 13 to 20 inches, lateral shift coupling, and CNC machined projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-UHD35-LAT-13 projector accessory 13-20 in

SKU CH-SHXV-FH83G

Aircraft-aluminium ceiling mount adjusts 13 to 20 inches down and fits Optoma UHD33, UHD35, UHD35+, UHD38, UHD55 and UHD58SA projectors

  • TypeProjector Mounts
  • Adjustable 13-20 inch drop positions projector at ideal height
  • 100% 6061-T6 aircraft aluminium construction ensures rigid, lasting support
  • 360-degree rotation plus full pitch and roll adjustment for precise image alignment
  • 5-inch lateral shift coupling centres lens when ceiling mount is off-centre
  • Model-specific CNC-machined plate fits Optoma UHD33 UHD35 UHD35+ UHD38 UHD55 UHD58SA only

Designed for Optoma UHD Series

This ceiling mount is engineered specifically for Optoma UHD33, UHD35, UHD35+, UHD38, UHD55 and UHD58SA projectors. The CNC-machined mounting plate ensures a precise fit using minimal projector coverage while leaving adequate space for heat dissipation. It is not intended for drop or false ceiling installations.

Telescoping Extension Range

The mount positions the projector approximately 13 to 20 inches from the ceiling, adjustable in 1 inch increments via the telescoping extension. A lateral shift coupling provides 1-1/2 inches of left or right adjustment to centre the lens when the mounting surface is not perfectly aligned with the screen centre.

100% Aircraft Aluminium Build

Constructed entirely from 6061-T6 aircraft grade aluminium for durability. The unit rotates 360 degrees and allows pitch and roll adjustment in any direction for flexible image alignment. All necessary installation hardware and detailed instructions are included for straightforward setup.

Highlights

  • Adjustable 13-20 inch drop positions projector at ideal height
  • 100% 6061-T6 aircraft aluminium construction ensures rigid, lasting support
  • 360-degree rotation plus full pitch and roll adjustment for precise image alignment
  • 5-inch lateral shift coupling centres lens when ceiling mount is off-centre
  • Model-specific CNC-machined plate fits Optoma UHD33 UHD35 UHD35+ UHD38 UHD55 UHD58SA only

Specifications

TypeProjector Mounts

Questions about this item

How far down from the ceiling will the Optoma UHD35 hang when this mount is fully extended?

The telescoping tube adjusts in 1 inch increments, positioning the projector anywhere from 13 to 20 inches below the ceiling surface.

Does the mount allow any side-to-side shift to centre the lens if the ceiling joist is off-centre?

Yes, the Lateral Shift Coupling provides 1-1/2 inches of left or right adjustment so the lens can be centred on the screen.

What ceiling height or structure is required for the 13 to 20 inch drop range?

The mount attaches directly to a solid ceiling; it is not designed for drop or false ceilings and needs a secure anchoring point for the 360 degree rotating base.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.