We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable swivel arm, shown without projector

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-TX7156 projector accessory

SKU CH-GJVR-B91DW

Ceiling mount positions the Optoma TX7156 projector four inches down with 360-degree swivel and ±35-degree tilt, CNC-machined from 6061-T6 aluminium and supplied with all hardware and instructions

  • TypeProjector Mounts
  • Designed for Optoma TX7156 models only
  • CNC-machined 6061-T6 aluminium plate for precise fit
  • 360° rotation plus ±35° pitch and roll
  • Sets projector roughly 4 inches from ceiling
  • All hardware and instructions included for quick install

Optoma TX7156 projector ceiling mount

This CNC-machined aluminium bracket is made specifically for the Optoma TX7156 projector. It positions the unit about four inches from the ceiling and supplies every screw and anchor needed for wood or drywall. The plate covers only the essential footprint so heat can vent freely. Installation follows the included step-by-step guide.

360-degree swivel with 35-degree tilt

The mount rotates a full 360 degrees and pitches or rolls up to 35 degrees in any direction. That range lets you square the image on the screen without moving the ceiling anchor. Because the plate is cut for this single model, the projector sits centred and stable through every adjustment.

Aircraft-grade 6061-T6 aluminium construction

The mounting plate is milled from 6061-T6 aluminium for rigidity without excess weight. No moving parts or fans mean silent operation and zero power draw. The open design leaves generous gaps around the projector vents so normal convection cooling is unimpeded. Not rated for drop-ceiling grids.

Highlights

  • Designed for Optoma TX7156 models only
  • CNC-machined 6061-T6 aluminium plate for precise fit
  • 360° rotation plus ±35° pitch and roll
  • Sets projector roughly 4 inches from ceiling
  • All hardware and instructions included for quick install

Specifications

TypeProjector Mounts

Questions about this item

Does the mount generate any noise or heat when the projector runs all day?

The mount is a passive aluminium bracket with no moving parts or electronics, so it adds no noise or heat to the installation.

What must I already own for this mount to work with my Optoma TX7156?

You need the Optoma TX7156 projector itself, a solid drywall ceiling or wooden beam, and basic tools such as a drill and screwdriver.

Will this mount still fit if I keep using an older Optoma model alongside the TX7156?

The machined plate is cut for the TX7156 only; it will not align with the mounting holes of any other Optoma projector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.