We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-TW675UTiM-3D-LAT-13 projector accessory

SKU CH-NQC0-5MKZH

Ceiling mount for Optoma TW675UTiM-3D, TW695UT-3D and TW695UTi-3D projectors with 360-degree rotation, lateral lens shift and 13 to 20 inch telescoping extension

  • TypeProjector Mounts
  • Aircraft-grade 6061-T6 aluminum ensures lasting strength
  • Telescoping arm adjusts 13 to 20 inches in one-inch steps
  • 360-degree rotation with pitch and roll for flexible aiming
  • Lateral shift coupling gives 1-1/2 inches of side-to-side lens centering
  • Model-specific CNC plate fits Optoma TW675UTiM-3D, TW695UT-3D and TW695UTi-3D only

Aircraft-Aluminium Projector Mount

This ceiling mount is built from 6061-T6 aircraft-grade aluminium and machined to fit Optoma TW675UTiM-3D, TW695UT-3D and TW695UTi-3D projectors only. It is intended for installers who need a model-specific bracket rather than a universal solution. Buyers with any other projector model cannot use this mount.

Telescoping Extension With Included Hardware

All required hardware and detailed instructions are supplied so the bracket can be assembled and fixed to a solid ceiling. The telescoping arm adjusts in one-inch steps to position the projector between 13 and 20 inches from the ceiling surface. The mount is not designed for drop or false ceilings, so installers working with suspended grids must choose a different system.

360-Degree Rotation And Lateral Shift

The coupling rotates a full 360 degrees and provides 1-1/2 inches of left-right lateral shift to centre the lens when the mounting point is off-axis. CNC-machined plate coverage is minimal, leaving space around the projector for heat to escape. The fixed extension range means rooms needing a shorter or longer drop cannot be accommodated.

Highlights

  • Aircraft-grade 6061-T6 aluminum ensures lasting strength
  • Telescoping arm adjusts 13 to 20 inches in one-inch steps
  • 360-degree rotation with pitch and roll for flexible aiming
  • Lateral shift coupling gives 1-1/2 inches of side-to-side lens centering
  • Model-specific CNC plate fits Optoma TW675UTiM-3D, TW695UT-3D and TW695UTi-3D only

Specifications

TypeProjector Mounts

Questions about this item

How can I verify the mount is holding the Optoma TW675UTiM-3D securely after installation?

Check that the CNC-machined plate sits flush on the projector's mounting points with no gaps, the 360-degree rotation locks firmly, and the telescoping extension stays fixed at the chosen inch increment between 13 and 20 inches.

What hardware comes in the box for the OPTOMA-TW675UTiM-3D-LAT-13 and what must I supply?

All necessary mounting hardware and detailed instructions are included; you only need to provide the tools for securing the ceiling bracket to your structural ceiling joists.

Which Optoma models does the OPTOMA-TW675UTiM-3D-LAT-13 mount fit?

This mount is designed exclusively for the Optoma TW675UTiM-3D, TW695UT-3D and TW695UTi-3D projectors; it will not fit any other make or model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.