We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount plate with short drop rod and four adjustable arms, shown against white background

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-ML330-MM projector accessory

SKU CH-EZYP-4HH8J

Aircraft-aluminium ceiling mount fits Optoma LH150, LH160, LH200, ML330, ML750ST and ML1050ST+ projectors with 360-degree rotation and 80-degree tilt

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aluminium plate ensures precise fit for listed Optoma models
  • 360-degree rotation with ±80° tilt and roll allows flexible projector aiming
  • Fixed 5-inch drop positions lens at practical viewing height
  • All mounting hardware and step-by-step instructions included for quick setup
  • Designed exclusively for LH150 LH160 LH200 ML330 ML1050ST+ ML750ST projectors

Aluminium ceiling mount for Optoma projectors

This mount is designed for Optoma LH150, LH160, LH200, ML330, ML1050ST+ and ML750ST projectors. It positions the unit roughly 5 inches from the ceiling using CNC-machined 6061-T6 aluminium. The plate is made specifically for these models so heat can escape freely. Projectors not on this list will not fit.

Install on drywall or beam with included hardware

All screws and detailed instructions are supplied for a quick setup on drywall ceilings or wooden beams. The mount rotates 360 degrees and tilts up to 80 degrees in any direction. It is not intended for drop or false ceilings. The actual plate you receive may look different from the pictures but will fit the listed models.

Fixed 5-inch drop from the ceiling

This accessory sets the projector approximately 5 inches away from the mounting surface. If your installation requires a different extension length or a drop-ceiling solution, this mount will not meet that need.

Highlights

  • CNC-machined 6061-T6 aluminium plate ensures precise fit for listed Optoma models
  • 360-degree rotation with ±80° tilt and roll allows flexible projector aiming
  • Fixed 5-inch drop positions lens at practical viewing height
  • All mounting hardware and step-by-step instructions included for quick setup
  • Designed exclusively for LH150 LH160 LH200 ML330 ML1050ST+ ML750ST projectors

Specifications

TypeProjector Mounts

Questions about this item

How can I verify the mount is holding the Optoma ML330 securely after installation?

The CNC-machined 6061-T6 aluminium plate is built for the exact projector models listed, so the ML330 sits flush with no wobble; the 360-degree rotation and ±80-degree tilt lock firmly once tightened, and the 5-inch ceiling offset leaves clear airflow space for heat to escape.

What hardware comes in the box and is anything else required for a drywall ceiling?

All screws, anchors and brackets needed for drywall or wooden-beam mounting are included along with detailed instructions; no extra parts must be purchased unless you are attaching to a drop or false ceiling, which this mount does not support.

Which Optoma models does the OPTOMA-ML330-MM version fit?

This version fits only the Optoma LH150, LH160, LH200, ML330, ML1050ST+ and ML750ST projectors; if your model number is not in that list the plate will not match the mounting holes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.