We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping pole extending 13 to 20 inches

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-HD73-LAT-13 projector accessory 13-20 inch extension

SKU CH-Y15A-0BXZW

Aircraft-aluminium ceiling mount positions the Optoma HD73 or TX773 13–20 inches down with 360° rotation and lateral shift for precise alignment

  • TypeProjector Mounts
  • Telescoping arm adjusts 13 to 20 inches in one-inch steps
  • Aircraft-grade 6061-T6 aluminium construction built to last
  • 360-degree rotation plus pitch and roll for flexible aiming
  • Lateral shift coupling provides 1-1/2 inch left-right lens centring
  • CNC-machined plate fits Optoma HD73 and TX773 models only

Precision CNC Mount for Optoma HD73 and TX773

This projector ceiling mount is machined from 6061-T6 aircraft-grade aluminum and built specifically for Optoma HD73 and TX773 models. The CNC-machined plate ensures a precise fit while leaving adequate space for heat to escape. All necessary hardware and detailed instructions are included for a straightforward installation.

Installers needing exact fit and lateral shift

The design suits technicians who require a dedicated plate rather than a universal bracket and who benefit from 1-1/2 inches of lateral shift to centre the lens when the ceiling mount point is off-axis. The telescoping column adjusts in one-inch increments from approximately 13 to 20 inches down from the ceiling. Installations on drop or false ceilings are not supported.

Telescoping extension range of 13 to 20 inches

The single specification that decides fit is the adjustable drop length, which sets the projector roughly 13 to 20 inches below the mounting surface in one-inch steps. This range determines whether the image lands at the correct height for the screen. Buyers with higher ceilings or lower mounting requirements should look at a different extension range.

Highlights

  • Telescoping arm adjusts 13 to 20 inches in one-inch steps
  • Aircraft-grade 6061-T6 aluminium construction built to last
  • 360-degree rotation plus pitch and roll for flexible aiming
  • Lateral shift coupling provides 1-1/2 inch left-right lens centring
  • CNC-machined plate fits Optoma HD73 and TX773 models only

Specifications

TypeProjector Mounts

Questions about this item

Will the OPTOMA-HD73-LAT-13 mount hold an older Optoma HD73 projector securely?

Yes, the CNC-machined plate is made specifically for the Optoma HD73 and TX773 models, using 6061-T6 aircraft-grade aluminium for a precise fit.

How can I confirm the 13-20 inch telescoping extension is set correctly after installation?

The extension locks in 1 inch increments; count the visible increments or measure from ceiling to projector — it should read between 13 and 20 inches.

Does the box include every bolt and bracket needed, or must I buy a separate ceiling plate?

All necessary hardware is included in the box — mounting plate, telescoping pole, lateral-shift coupling and fasteners — no extra parts are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.