We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-HD7100-LAT-13 Projector Accessory

SKU CH-YA9W-2B534

Ceiling mount for Optoma HD7100 and HD7300 projectors extends 13 to 20 inches with 360-degree rotation and 1.5-inch lateral shift

  • TypeProjector Mounts
  • Aircraft-grade 6061 aluminium construction delivers long-term rigidity
  • Telescoping extension adjusts drop from 13 to 20 inches in one-inch steps
  • 360-degree rotation plus pitch and roll for flexible aiming
  • Lateral shift coupling centres the lens when the ceiling is off-centre
  • CNC-machined plate fits Optoma HD7100 and HD7300 only

Ceiling Mount for Optoma HD7100 and HD7300

This projector accessory is a dedicated ceiling mount built for Optoma HD7100 and HD7300 models. It uses 100% 6061-T6 aircraft aluminum construction for durability. The mount includes all necessary hardware and detailed instructions for easy installation. It is designed specifically for the listed projectors only.

Who This Suits and Who Should Look Elsewhere

Installers needing precise alignment for Optoma HD7100 or HD7300 projectors will benefit from the CNC-machined plate and 360-degree rotation. The lateral shift coupling provides 1-1/2 inches of left-right adjustment for off-centre mounting points. Buyers with different projector models or drop-ceiling installations cannot use this mount.

Telescoping Extension Range 13 to 20 Inches

The telescoping extension sets the projector 13 to 20 inches from the ceiling in 1 inch increments. This fixed range decides whether the mount fits the room's ceiling height and desired projection distance. Verify the required drop length before purchase.

Highlights

  • Aircraft-grade 6061 aluminium construction delivers long-term rigidity
  • Telescoping extension adjusts drop from 13 to 20 inches in one-inch steps
  • 360-degree rotation plus pitch and roll for flexible aiming
  • Lateral shift coupling centres the lens when the ceiling is off-centre
  • CNC-machined plate fits Optoma HD7100 and HD7300 only

Specifications

TypeProjector Mounts

Questions about this item

How do I install the OPTOMA-HD7100-LAT-13 mount and which step is often missed?

Attach the CNC-machined plate to the Optoma HD7100 or HD7300, secure the telescopic column to a structural ceiling joist — not a drop ceiling — then set the 13 to 20 inch extension in 1 inch increments; the step most often missed is verifying the joist can carry the load before drilling.

What maintenance or replacement will this mount need over time?

The 6061-T6 aircraft aluminium construction resists corrosion, so no scheduled replacement is required; simply re-torque the bolts after the first few weeks and inspect annually for any loosening caused by vibration.

What limit appears first during sustained use of this ceiling mount?

The 360 degree rotation, pitch and roll joints may develop slight play after years of thermal cycling, and the 1-1/2 inch lateral shift range cannot compensate if the ceiling anchor shifts beyond that tolerance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.