We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with slotted plate and lateral shift arm, sets projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-HD600X-LV-SLOTTED projector accessory

SKU CH-C1R4-JCFNR

Aircraft-aluminium ceiling mount with 360-degree rotation, 1.5-inch lateral shift and 5-inch drop for listed Optoma projectors

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aircraft aluminium ensures a precise, durable fit
  • 360° rotation with pitch and roll adjustment lets you aim the image precisely
  • 100% aluminium construction keeps the mount light yet rigid
  • Lateral shift coupling centres the lens when the ceiling mount is off-centre
  • Fixed 5-inch drop positions the projector close to the ceiling for a clean look

Ceiling Mount for Optoma HD600X-LV and HD600 Series

This aluminium ceiling mount is built specifically for Optoma HD600X-LV, HD640, HD65, HD66, HD67, HD6700 and HD6720 projectors. It uses a CNC-machined plate that matches the chassis mounting points of those models only. The design leaves clearance for ventilation while keeping the projector close to the ceiling.

Fixed 5-Inch Drop with 360-Degree Rotation

The mount positions the projector roughly five inches from the ceiling surface and allows full 360-degree yaw plus pitch and roll adjustment. A lateral-shift coupling adds one and a half inches of side-to-side travel to centre the lens when the mounting point is off-axis. The fixed drop means it is not suited for suspended or false-ceiling installations.

Included Hardware and Machined Plate

All mounting screws, anchors and detailed instructions are supplied for a single-person installation. The projector plate is milled from 6061-T6 aircraft-grade aluminium rather than stamped steel. The exact plate profile may differ from product images but will only fit the Optoma models listed above.

Highlights

  • CNC-machined 6061-T6 aircraft aluminium ensures a precise, durable fit
  • 360° rotation with pitch and roll adjustment lets you aim the image precisely
  • 100% aluminium construction keeps the mount light yet rigid
  • Lateral shift coupling centres the lens when the ceiling mount is off-centre
  • Fixed 5-inch drop positions the projector close to the ceiling for a clean look

Specifications

TypeProjector Mounts

Questions about this item

Will this mount leave enough clearance for the Optoma HD600X-LV vents when set 5 inches from the ceiling?

The mount positions the projector about 5 inches below the ceiling and uses minimal plate coverage, leaving adequate space for heat to escape from the Optoma HD600X-LV.

How can I verify the lateral shift coupling is centred after installing the Optoma HD65?

After mounting the Optoma HD65, check that the lens aligns with the screen centre; the coupling provides 1-1/2 inches of left/right adjustment for fine alignment.

Does the box include every bolt and spacer needed for the Optoma HD6720, or must I buy extra hardware?

All necessary hardware and detailed instructions are included for the Optoma HD6720; no separate fasteners are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.