We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium projector ceiling mount with slotted plate, sets unit five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-EW1691e-SLOTTED projector accessory

SKU CH-6PHH-H1GJQ

Ceiling mount for Optoma EW1691e, EX7155e and TW1692 projectors with 360-degree rotation, lateral shift adjustment and 6061-T6 aluminium construction

  • TypeProjector Mounts
  • Secure placement with CNC-machined 6061-T6 aluminium plate
  • Full aiming freedom via 360-degree rotation plus pitch and roll
  • Lateral shift coupling gives 1-1/2 inch side-to-side lens centring
  • Fixed 5-inch ceiling drop positions projector close to surface
  • Includes all mounting hardware and detailed instructions for quick setup

Optoma Projector Ceiling Mount

This ceiling mount is designed exclusively for Optoma EW1691e, EX7155e and TW1692 projector models. It provides a secure, model-specific attachment point for permanent overhead installation in classrooms, meeting rooms or home theatres. The unit is machined from 6061-T6 aircraft-grade aluminium for structural rigidity and long-term durability. All required mounting hardware and detailed instructions are included for a straightforward fit.

Mounting Constraints and Adjustment

The bracket positions the projector roughly five inches below the ceiling surface and is not intended for drop or false-ceiling installations. A lateral-shift coupling delivers one-and-a-half inches of horizontal travel to centre the lens when the mounting point is off-axis. The assembly rotates a full 360 degrees and allows pitch and roll adjustment in any direction for precise image alignment. The CNC-machined plate minimises coverage to preserve ventilation around the projector chassis.

Compatibility Check Before Ordering

Verify that your projector is exactly one of the three Optoma models named above; the plate will not fit any other make or model even if the hole pattern appears similar. Confirm the ceiling structure can accept a fixed rigid mount with a short five-inch drop and that the installation is not into a suspended ceiling grid. Ensure the mounting location allows enough lateral clearance for the one-and-a-half-inch shift mechanism to operate without obstruction.

Highlights

  • Secure placement with CNC-machined 6061-T6 aluminium plate
  • Full aiming freedom via 360-degree rotation plus pitch and roll
  • Lateral shift coupling gives 1-1/2 inch side-to-side lens centring
  • Fixed 5-inch ceiling drop positions projector close to surface
  • Includes all mounting hardware and detailed instructions for quick setup

Specifications

TypeProjector Mounts

Questions about this item

Which projector models does this mount fit?

It fits Optoma EW1691e, EX7155e and TW1692 projectors only. The plate is CNC-machined for those models and will not fit others.

How far from the ceiling does the mount hold the projector?

The mount positions the projector about 5 inches from the ceiling surface.

How much lateral adjustment does the coupling provide?

The Lateral Shift Coupling allows 1-1/2 inches of left or right movement to centre the lens.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.