We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with 10 inch extension arm and adjustable projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-EW1691e-MM-10EXT 10" Extension Projector Accessory

SKU CH-SKCT-636K2

A 10-inch extension ceiling mount made from 6061-T6 aircraft aluminum, offering 360-degree rotation and +/- 80-degree tilt for Optoma EW1691e, EX7155e and TW1692 projectors

  • TypeProjector Mounts
  • Sets projector 10 inches from ceiling for optimal placement
  • 360-degree rotation plus 80-degree tilt for flexible aiming
  • CNC-machined 6061-T6 aircraft aluminium ensures rigid, lasting support
  • Custom plate fits Optoma EW1691e EX7155e TW1692 only
  • All hardware and clear instructions included for quick install

Projector Ceiling Mount Extension

The OPTOMA-EW1691e-MM-10EXT positions compatible Optoma projectors approximately 10 inches from the ceiling. It suits installers who need a fixed drop length for EW1691e, EX7155e or TW1692 models. The CNC-machined plate is made from 6061-T6 aircraft-grade aluminium for a precise fit. Buyers with other projector makes or models cannot use this mount.

Thermals and Quiet Operation

The design leaves adequate space around the projector for heat to escape during normal use. Passive construction means no fan noise or power draw is added to the installation. The mount rotates 360 degrees and tilts up to 80 degrees in either direction for image alignment. No active cooling components are present to fail or require maintenance.

Build Integration Requirements

All necessary hardware and detailed instructions are included for mounting to drywall ceilings or wooden beams. The unit is not intended for drop or false ceilings. The actual mounting plate may differ from product images but will only fit the listed Optoma models. The projector itself is not included with this accessory.

Highlights

  • Sets projector 10 inches from ceiling for optimal placement
  • 360-degree rotation plus 80-degree tilt for flexible aiming
  • CNC-machined 6061-T6 aircraft aluminium ensures rigid, lasting support
  • Custom plate fits Optoma EW1691e EX7155e TW1692 only
  • All hardware and clear instructions included for quick install

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the 10-inch extension to a drywall ceiling and which step is most often missed?

Secure the ceiling plate to joists using the supplied lag bolts, then bolt the extension tube to the plate; the step most often missed is confirming the joist centres before drilling, because the plate holes are fixed.

What part of the CNC-machined 6061-T6 aluminium mount will need inspection or replacement over time?

The four M6 set screws that lock the 360-degree rotation and ±80-degree tilt joints can loosen with vibration; check and re-torque them annually.

At what tilt angle does the 10-inch offset create the greatest leverage on the ceiling anchors during prolonged use?

The ±80-degree maximum tilt produces the highest bending moment on the lag bolts; stay within that limit and verify the joists are solid before applying sustained off-centre loads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.