We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable arm holding projector plate, extends five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-EH501-MM projector accessory

SKU CH-4QJY-5DCJN

Aircraft-grade aluminium ceiling mount positions compatible Optoma projectors 5 inches from the ceiling with 360-degree rotation and ±80-degree tilt

  • TypeProjector Mounts
  • Built to last with 100% 6061-T6 aircraft aluminium construction
  • Easy installation with all hardware and detailed instructions included
  • 360-degree rotation plus pitch and roll adjustment for flexible positioning
  • +/- 80 degree tilt range allows precise image alignment
  • Custom CNC-machined plate fits only the listed Optoma models for secure mounting

Mount compatibility

This ceiling mount is built for Optoma EH501, EW420, EX400, RX825, W501 and X501 projectors only. The CNC-machined plate fits those models precisely and leaves room for heat to escape. It is not designed for any other projector or for drop ceilings.

Installation experience

All hardware and detailed instructions are included for drywall or wooden-beam ceilings. The aircraft-grade 6061-T6 aluminum construction keeps the assembly rigid while you align the projector. The plate you receive may look different from the product images but will still fit the listed models.

Range of motion limits

The mount holds the projector roughly 5 inches from the ceiling and allows 360-degree rotation with +/- 80 degrees of tilt. Pitch and roll can be adjusted in any direction within that envelope. Buyers needing a shorter drop or a false-ceiling solution will need a different mounting system.

Highlights

  • Built to last with 100% 6061-T6 aircraft aluminium construction
  • Easy installation with all hardware and detailed instructions included
  • 360-degree rotation plus pitch and roll adjustment for flexible positioning
  • +/- 80 degree tilt range allows precise image alignment
  • Custom CNC-machined plate fits only the listed Optoma models for secure mounting

Specifications

TypeProjector Mounts

Questions about this item

How do I confirm the mount is holding the Optoma EH501 at the correct 5-inch drop and 360-degree rotation after installation?

Measure the gap between the ceiling and the projector — it should sit about 5 inches down. Gently rotate the unit; it should turn a full 360 degrees and tilt smoothly through the ±80 degree range without binding.

Which screws, anchors and tools are included for a drywall or wooden-beam ceiling, and what must I supply myself?

The box contains every bolt, washer and anchor needed for both drywall and wood-beam mounting, plus the CNC-machined 6061-T6 aluminium plate tailored to the Optoma EH501, EW420, EX400, RX825, W501 and X501. You only need a drill, screwdriver and level.

My projector is an Optoma EX400 — will the OPTOMA-EH501-MM plate fit, or do I need a different version?

Yes, the EX400 is one of the six models listed for this exact mount. The CNC-machined plate you receive is made for the EH501, EW420, EX400, RX825, W501 and X501, so no other version is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.