We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm extending 13 to 20 inches and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-EH334-LAT-13 projector accessory

SKU CH-PYDE-35WHT

Ceiling mount positions compatible Optoma projectors 13 to 20 inches down with 360-degree rotation and lateral lens shift

  • TypeProjector Mounts
  • Built to last with 100% 6061-T6 aircraft-grade aluminium construction
  • Telescoping extension sets projector 13 to 20 inches from ceiling in 1 inch steps
  • 360 degree rotation plus pitch and roll for flexible aiming
  • Lateral shift coupling allows left/right lens centring on off-centre ceilings
  • CNC-machined plate fits listed Optoma models EH334 EH335 EH336 HD143X HD152X WU334 WU336 only

Precision Fit for Optoma Projectors

This ceiling mount is engineered specifically for Optoma EH334, EH335, EH336, HD143X, HD152X, WU334 and WU336 models. The CNC-machined mounting plate ensures exact fitment with minimal projector coverage, preserving ventilation pathways. It is built for installers who need a dedicated, model-specific solution rather than a universal bracket.

Aircraft-Grade Build with Lateral Shift

Constructed from 100% 6061-T6 aluminium, the mount includes all hardware and detailed instructions for straightforward installation. A telescoping extension positions the projector 13 to 20 inches from the ceiling in 1-inch increments. The Lateral Shift Coupling provides 1-1/2 inches of side-to-side adjustment to centre the lens when the mounting surface is off-axis. The unit is not intended for drop or false ceilings.

360-Degree Orientation Under Constant Load

The mount rotates a full 360 degrees and allows pitch and roll in any direction, maintaining stable alignment during extended operation. Rigid aluminium construction resists flexing when the projector runs continuously, keeping the image steady. Heat escapes freely through the open plate design, supporting reliable performance throughout long presentation or entertainment sessions.

Highlights

  • Built to last with 100% 6061-T6 aircraft-grade aluminium construction
  • Telescoping extension sets projector 13 to 20 inches from ceiling in 1 inch steps
  • 360 degree rotation plus pitch and roll for flexible aiming
  • Lateral shift coupling allows left/right lens centring on off-centre ceilings
  • CNC-machined plate fits listed Optoma models EH334 EH335 EH336 HD143X HD152X WU334 WU336 only

Specifications

TypeProjector Mounts

Questions about this item

How far from the ceiling does the telescoping extension position the Optoma EH334?

The mount sets the projector approximately 13 to 20 inches from the ceiling in 1 inch increments using the telescoping extension.

What noise or heat should I expect from the aircraft aluminum mount during all-day operation?

The 6061-T6 aluminum mount itself produces no noise or heat; it leaves adequate space for the projector's own heat to escape.

Which Optoma projectors must I already own for this CNC-machined plate to fit?

Compatible models are EH334, EH335, EH336, HD143X, HD152X, WU334 and WU336; the plate is made only for these projectors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.