We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping pole extending 13 to 20 inches and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. OPTOMA-DH350-LAT-13 Projector Ceiling Mount 13-20 in Extension

SKU CH-1YJ1-T2MSG

Ceiling mount for Optoma projectors adjusts 13 to 20 inches down with 360-degree rotation and 1.5-inch lateral shift

  • TypeProjector Mounts
  • 100% 6061-T6 aircraft aluminium ensures long-term rigidity
  • Telescoping arm adjusts 13 to 20 inches from ceiling in 1 inch steps
  • Lateral shift coupling centres lens when mount is off-centre
  • 360° rotation plus pitch and roll for precise image alignment
  • CNC-machined plate fits Optoma DH350 DW318e DW416 DX3417 H116 H184X HD140X only

Optoma-Specific Ceiling Mount

This projector ceiling mount is designed for Optoma DH350, DW318e, DW416, DX3417, H116, H184X and HD140X models. It positions the unit 13 to 20 inches from the ceiling using a telescoping extension. The plate is CNC machined from 6061-T6 aircraft aluminum for a precise fit. All necessary installation hardware is included.

Installers Needing Lateral Lens Alignment

The mount suits installations where the ceiling anchor point does not line up with the screen centre. A lateral shift coupling provides 1-1/2 inches of left or right adjustment to centre the projector lens. It also allows 360 degree rotation plus pitch and roll movement. Builders mounting to drop or false ceilings should look at a different solution.

Telescoping Extension Range 13-20 Inches

The single specification that decides fit is the adjustable extension length. This mount sets the projector approximately 13 to 20 inches from the ceiling in 1 inch increments. Verify your required drop distance falls within this range before purchase. The plate you receive may differ from product images but will fit the listed Optoma models only.

Highlights

  • 100% 6061-T6 aircraft aluminium ensures long-term rigidity
  • Telescoping arm adjusts 13 to 20 inches from ceiling in 1 inch steps
  • Lateral shift coupling centres lens when mount is off-centre
  • 360° rotation plus pitch and roll for precise image alignment
  • CNC-machined plate fits Optoma DH350 DW318e DW416 DX3417 H116 H184X HD140X only

Specifications

TypeProjector Mounts

Questions about this item

How do I know if my Optoma model fits this ceiling mount?

The mount is designed for Optoma DH350, DW318e, DW416, DX3417, H116, H184X and HD140X models only. The CNC-machined plate matches the mounting holes on those projectors, and the actual plate you receive may look different from the photo but will fit the listed models.

What does the 13 to 20 inch extension range mean for my installation?

The telescoping pole adjusts in 1 inch increments so the projector hangs 13 to 20 inches below the ceiling. This lets you clear low ceilings or drop the image to the right height without cutting the pole.

How much lateral shift does the coupling provide for lens alignment?

The Lateral Shift Coupling gives 1-1/2 inches of left or right movement so you can centre the lens when the ceiling joist is not perfectly aligned with the screen centre.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.