We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium telescopic projector ceiling mount with lateral shift coupling, 13 to 20 inch extension

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. NEC-VT46-LAT-13 projector accessory 13-20 in extension

SKU CH-ZXD1-JCZ8F

Aircraft-aluminium ceiling mount for NEC VT-series projectors, adjustable from 13 to 20 inches with 360-degree rotation and lateral shift

  • TypeProjector Mounts
  • Telescoping arm places projector 13 to 20 inches from ceiling
  • Aircraft-grade 6061-T6 aluminium construction ensures rigid, lasting support
  • 360-degree rotation plus pitch and roll for precise image alignment
  • Lateral shift coupling adds 1-1/2 inches of side-to-side lens centring
  • CNC-machined plate fits NEC VT46, VT460, VT465, VT560, VT660, VT660K only

NEC Projector Ceiling Mount

This aluminium ceiling mount fits NEC VT46, VT460, VT465, VT560, VT660 and VT660K projectors only. It is built from 6061-T6 aircraft-grade aluminium and positions the projector 13 to 20 inches from the ceiling. The design leaves space for heat to escape and uses minimal projector coverage. Buyers with other NEC models or different brands cannot use this mount.

Installation and Adjustment

All necessary hardware and detailed instructions are included for quick assembly. The telescoping extension adjusts in one-inch increments between 13 and 20 inches. A lateral shift coupling provides 1-1/2 inches of left-right adjustment to centre the lens when the mounting surface is off-centre. The mount rotates 360 degrees and allows pitch and roll in any direction. It is not intended for drop or false ceilings.

Extension Range and Compatibility Limits

The fixed telescoping range sets the projector 13 to 20 inches below the ceiling, so rooms needing a shorter or longer drop require a different solution. The CNC-machined mounting plate is specific to the six listed NEC models and will not fit other projectors. Installers must verify the exact model number before purchase because the plate received may look different from product images.

Highlights

  • Telescoping arm places projector 13 to 20 inches from ceiling
  • Aircraft-grade 6061-T6 aluminium construction ensures rigid, lasting support
  • 360-degree rotation plus pitch and roll for precise image alignment
  • Lateral shift coupling adds 1-1/2 inches of side-to-side lens centring
  • CNC-machined plate fits NEC VT46, VT460, VT465, VT560, VT660, VT660K only

Specifications

TypeProjector Mounts

Questions about this item

How do I confirm the telescoping extension is set correctly after installation?

The extension sets the projector 13 to 20 inches from the ceiling in 1-inch increments; measure the drop and verify the image is centred using the 1-1/2 inch lateral shift.

What hardware comes in the box and what must I supply?

All necessary mounting hardware and detailed instructions are included; you only need to provide your own ceiling anchors or fasteners suited to the mounting surface.

My projector is an NEC VT465 — is this the right mount?

Yes, the mount is designed specifically for the NEC VT46, VT460, VT465, VT560, VT660 and VT660K models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.