We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping arm extending 13 to 20 inches and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. NEC-PA600X-LAT-13 projector accessory

SKU CH-H2YV-S51ZN

Ceiling mount positions NEC PA-series projectors 13 to 20 inches down with 360-degree rotation and 1.5-inch lateral shift

  • TypeProjector Mounts
  • Compatible with NEC PA600X PA621X PA622U PA622X PA672W PA722X projectors
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 13 to 20 inch telescoping extension in 1-inch increments
  • 5-inch lateral shift coupling centres the lens
  • CNC-machined 6061-T6 aircraft aluminium plate with included hardware

NEC PA Series Projector Mount

This aluminium ceiling mount is designed specifically for NEC PA600X, PA621X, PA622U, PA622X, PA672W and PA722X projectors. It provides a secure, model-specific attachment that leaves adequate space for heat to escape. The CNC-machined plate ensures precise fitment for permanent installations.

Lateral Shift and Telescoping Extension

The mount includes a lateral shift coupling that provides 1-1/2 inches of left/right adjustment to centre the projector lens when the ceiling mounting point is off-centre. A telescoping arm sets the projector approximately 13 to 20 inches from the ceiling in one-inch increments. All necessary installation hardware and detailed instructions are supplied in the box.

Compatibility and Ceiling Type Check

Verify that your exact projector model appears in the supported list before ordering, as the plate will only fit those units. The mount is not intended for drop or false ceilings, so confirm your ceiling structure can accept the hardware. The supplied plate may look different from product images but will match the listed models.

Highlights

  • Compatible with NEC PA600X PA621X PA622U PA622X PA672W PA722X projectors
  • 360-degree rotation plus pitch and roll for flexible aiming
  • 13 to 20 inch telescoping extension in 1-inch increments
  • 5-inch lateral shift coupling centres the lens
  • CNC-machined 6061-T6 aircraft aluminium plate with included hardware

Specifications

TypeProjector Mounts

Questions about this item

Will the aluminium mounting plate or any hardware need periodic replacement?

The mount uses 6061-T6 aircraft-grade aluminium and includes all necessary hardware; no wear parts are identified for routine replacement.

How far can the projector hang from the ceiling before the telescoping extension reaches its limit?

The extension adjusts in 1-inch increments and stops at 20 inches from the ceiling.

Does the mount trap heat or add noise when the projector runs all day?

The open CNC-machined plate leaves space for heat to escape and the mount itself has no moving parts or fans.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.