We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aircraft-aluminium projector ceiling mount with telescoping arm extending 13 to 20 inches

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. NEC-P401W-LAT-13 projector accessory

SKU CH-1S3J-CEPZQ

Ceiling mount for NEC P401W, P451W, P451X, P501X, PE501X, P603X and P604X projectors adjusts 13 to 20 inches from the ceiling with 360-degree rotation and lateral shift

  • TypeProjector Mounts
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • 13 to 20 inch telescoping extension positions projector at ideal height
  • 360 degree rotation with pitch and roll adjustment for flexible aiming
  • Lateral shift coupling centres lens when ceiling mount is off-centre
  • All installation hardware and detailed instructions included for quick setup

NEC Projector Ceiling Mount

This ceiling mount is built for NEC P401W, P451W, P451X, P501X, PE501X, P603X and P604X projectors. It uses a CNC-machined plate made from 6061-T6 aircraft aluminium to fit those models precisely. The design leaves clearance for heat dissipation while keeping projector coverage minimal. Installers who need a dedicated, model-specific bracket for these units will find it suitable.

Replaces Universal Brackets

Universal mounts often leave gaps or block vents on these NEC models; this accessory solves that with a plate cut to the exact hole pattern. The telescoping extension sets the projector 13 to 20 inches from the ceiling in 1 inch increments. A 360-degree rotation joint plus pitch and roll adjustment handles angled ceilings. The lateral shift coupling adds 1-1/2 inches of side-to-side travel to centre the lens when the mounting point is off-centre.

Straightforward Installation

All required hardware and detailed instructions are supplied in the box. The mount is not intended for drop or false ceilings, so a solid structural anchor is necessary. The actual plate shipped may look different from product images but will match the listed projectors only. Buyers with other projector brands or ceiling types should look elsewhere.

Highlights

  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • 13 to 20 inch telescoping extension positions projector at ideal height
  • 360 degree rotation with pitch and roll adjustment for flexible aiming
  • Lateral shift coupling centres lens when ceiling mount is off-centre
  • All installation hardware and detailed instructions included for quick setup

Specifications

TypeProjector Mounts

Questions about this item

What ceiling clearance does the 13-20 inch telescoping extension require?

The mount positions the projector 13 to 20 inches below the ceiling in 1 inch increments, so the ceiling must allow at least 13 inches of drop.

How do I secure the 6061-T6 aluminium plate to the NEC P401W, and what step is often missed?

Use the included hardware to bolt the CNC-machined plate to the projector's mounting holes, then lock the lateral shift coupling — many installers forget to tighten the coupling after centring the lens.

When should the lateral shift coupling or telescoping hardware be checked or replaced?

Inspect the coupling and extension bolts annually; re-torque if vibration has loosened them, and replace any hardware that shows corrosion or stripped threads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.