We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable arm and projector plate, extends five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. MITS-XD500U-SLOTTED projector accessory

SKU CH-A192-RDQHG

Ceiling mount for Mitsubishi XD500U, XD500U-ST, XD510U, XD520U and XD530U projectors with 360-degree rotation and 1.5-inch lateral shift

  • TypeProjector Mounts
  • Aircraft-grade 6061-T6 aluminium construction built to last
  • 360-degree rotation with pitch and roll for flexible positioning
  • 1-1/2 inch lateral shift coupling centres the lens precisely
  • CNC-machined plate fits Mitsubishi XD500U XD500U-ST XD510U XD520U XD530U models only
  • Sets projector approximately 5 inches from the ceiling

Precision Fit for Mitsubishi XD Series

This ceiling mount is built for Mitsubishi XD500U, XD500U-ST, XD510U, XD520U and XD530U projectors. The CNC-machined plate is made from 6061-T6 aircraft aluminum and positions the unit roughly 5 inches from the ceiling. It is not designed for drop or false ceilings. Buyers with other projector models will need a different mount.

Straightforward Installation with Included Hardware

All required hardware and detailed instructions come in the box for a quick setup. The mount rotates 360 degrees and allows pitch and roll adjustment in any direction. A lateral shift coupling provides 1-1/2 inches of left or right movement to centre the lens when the ceiling joist is off-centre. The plate you receive may look different from the product images but will fit the listed models.

Verify Projector Model and Ceiling Type First

Confirm your exact projector model matches the supported list before ordering because the plate only fits those specific units. Ensure you are mounting to a solid structural ceiling, as this product is not intended for suspended or false ceiling grids. Check that a 5-inch drop places the lens at the correct height for your screen. No other compatibility checks are described by the manufacturer.

Highlights

  • Aircraft-grade 6061-T6 aluminium construction built to last
  • 360-degree rotation with pitch and roll for flexible positioning
  • 1-1/2 inch lateral shift coupling centres the lens precisely
  • CNC-machined plate fits Mitsubishi XD500U XD500U-ST XD510U XD520U XD530U models only
  • Sets projector approximately 5 inches from the ceiling

Specifications

TypeProjector Mounts

Questions about this item

How can I confirm the mount is holding the Mitsubishi XD500U securely after installation?

The CNC‑machined 6061‑T6 aluminium plate fits the listed models precisely, the 360‑degree rotation locks in place, and the projector sits about 5 inches from the ceiling with 1‑1/2 inches of lateral shift for lens centring.

What hardware comes in the box and do I need any extra parts for a concrete ceiling?

All necessary mounting hardware and detailed instructions are included; concrete anchors are not supplied and must be purchased separately if you are fixing to concrete.

Which Mitsubishi models does the MITS‑XD500U‑SLOTTED mount support?

It is designed for the XD500U, XD500U‑ST, XD510U, XD520U and XD530U projectors only; other models will not fit this plate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.