We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aircraft-aluminium projector ceiling mount with 10 inch extension arm and adjustable tilt joint

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. MITS-HC8000D-BL-MM-10EXT projector accessory

SKU CH-2EKV-M9Q3W

Ceiling mount positions Mitsubishi HC8000D-BL, UD740U, WD720U or WD720U-G projectors 10 inches down with 360-degree rotation and ±80-degree tilt

  • TypeProjector Mounts
  • Designed for Mitsubishi HC8000D-BL UD740U WD720U WD720U-G projectors
  • 10-inch drop positions the projector approximately 10 inches from the ceiling
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit and durability
  • 360-degree rotation with ±80° tilt provides flexible aiming
  • All mounting hardware and detailed instructions included for straightforward installation

Direct-Fit Ceiling Mount for Mitsubishi Projectors

This ceiling mount is built specifically for the Mitsubishi HC8000D-BL, UD740U, WD720U and WD720U-G models. The CNC-machined plate aligns with the exact mounting points on those units, leaving room for heat to escape. It positions the projector roughly 10 inches from the ceiling surface.

Drywall or Beam Installation with Included Hardware

All screws, anchors and brackets needed for a drywall ceiling or wooden beam are supplied in the box. The package also contains step-by-step instructions for a straightforward fitting process. This mount is not designed for drop or false ceilings, so a solid structural surface is required.

Verify Your Exact Model Before Ordering

The mounting plate will only fit the four Mitsubishi projectors named above; other models are not compatible even if they look similar. The plate you receive may differ from the product images but will match the listed units. Confirm your projector model number matches one of the supported types before purchasing.

Highlights

  • Designed for Mitsubishi HC8000D-BL UD740U WD720U WD720U-G projectors
  • 10-inch drop positions the projector approximately 10 inches from the ceiling
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit and durability
  • 360-degree rotation with ±80° tilt provides flexible aiming
  • All mounting hardware and detailed instructions included for straightforward installation

Specifications

TypeProjector Mounts

Questions about this item

How can I confirm the mount is holding the projector securely after installation?

Verify the projector sits roughly 10 inches from the ceiling and rotates smoothly through 360 degrees while the tilt locks firmly at up to 80 degrees in either direction.

What hardware comes in the box and what must I supply myself?

All mounting hardware for drywall or wooden beams and the CNC-machined 6061-T6 aluminium projector plate are included; you only need basic tools such as a drill and screwdriver.

Which projector models does the MITS-HC8000D-BL-MM-10EXT mount fit?

It is built exclusively for the Mitsubishi HC8000D-BL, UD740U, WD720U and WD720U-G — no other models are supported.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.