We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm extending 13 to 20 inches and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. INFOCUS-IN2124-LAT-13 Projector Accessory 13-20 inch

SKU CH-NPV0-WSBVQ

A 13 to 20 inch telescoping ceiling mount for Infocus IN2124 and IN2126 projectors with 360-degree rotation, lateral shift and 6061-T6 aluminium construction

  • TypeProjector Mounts
  • Telescoping extension positions projector 13 to 20 inches from ceiling
  • 6061-T6 aircraft aluminium construction ensures rigid, long-lasting support
  • 360-degree rotation with pitch and roll adjustment enables precise image alignment
  • Custom CNC-machined mounting plate fits Infocus IN2124 and IN2126 models exactly
  • Lateral shift coupling provides left-right lens centring for off-centre ceiling mounts

Compatible Infocus IN2124 IN2126 Mount

This projector accessory is built specifically for Infocus IN2124 and IN2126 models. The CNC-machined mounting plate is made from 6061-T6 aircraft aluminium and fits only the projectors listed. It provides a precise fit while leaving adequate space for heat to escape during operation.

Telescoping Extension 13-20 Inches

The telescoping extension sets the projector approximately 13 to 20 inches from the ceiling in 1 inch increments. Under sustained use the mount holds position securely and allows 360 degree rotation plus pitch and roll adjustment. A lateral shift coupling provides 1-1/2 inches of left or right lens centring for off-centre mounting surfaces.

Check Projector Model and Ceiling Type

Verify your projector is an Infocus IN2124 or IN2126 before ordering because the plate will only fit those models. This mount is not intended for drop or false ceilings. All necessary hardware and detailed instructions are included for installation.

Highlights

  • Telescoping extension positions projector 13 to 20 inches from ceiling
  • 6061-T6 aircraft aluminium construction ensures rigid, long-lasting support
  • 360-degree rotation with pitch and roll adjustment enables precise image alignment
  • Custom CNC-machined mounting plate fits Infocus IN2124 and IN2126 models exactly
  • Lateral shift coupling provides left-right lens centring for off-centre ceiling mounts

Specifications

TypeProjector Mounts

Questions about this item

How much heat clearance does the 6061-T6 aluminium mount leave around the Infocus IN2124?

The CNC-machined plate uses minimal projector coverage so hot air can escape freely from the IN2124 vents.

What hardware must I already have to secure this mount to a solid ceiling?

You need your own lag bolts or concrete anchors rated for the ceiling material; the kit only supplies projector-side fasteners.

Will the 13-20 inch telescoping range still let me centre the lens if my IN2126 is offset from the screen?

Yes, the lateral-shift coupling adds 1-1/2 inches of side-to-side travel at any extension setting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.