We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver telescopic projector ceiling mount with adjustable extension arm and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. INFOCUS-IN134-LAT-13 Projector Accessory 13-20 in extension

SKU CH-CZ5G-77Y9M

A projector ceiling mount built from 100% 6061-T6 aircraft aluminium with a telescoping extension of 13 to 20 inches and 360-degree rotation

  • TypeProjector Mounts
  • Compatible with Infocus IN134, IN136 and IN138HD models
  • 100% aircraft-grade 6061-T6 aluminium construction for lasting strength
  • Telescoping extension adjusts 13 to 20 inches from ceiling in 1-inch steps
  • 360-degree rotation with pitch and roll for flexible aiming
  • Lateral shift coupling provides 1-1/2 inches of left/right lens centring

Projector ceiling mount for Infocus models

This ceiling mount is built specifically for Infocus IN134, IN134ST, IN136, IN136ST and IN138HD projectors. It uses a CNC-machined plate made from 100% 6061-T6 aircraft aluminium to ensure a precise fit. The design keeps projector coverage minimal while leaving space for heat to escape. All necessary hardware and detailed instructions are included for quick installation.

Telescoping extension sets distance from ceiling

The telescoping arm positions the projector approximately 13 to 20 inches from the ceiling in one-inch increments. A lateral shift coupling provides one-and-a-half inches of left or right adjustment to centre the lens when the mounting surface is off-centre. The mount rotates 360 degrees and can be pitched or rolled in any direction for precise image alignment. It is not intended for drop or false ceilings.

Requires solid ceiling structure

Installation needs a solid ceiling capable of supporting the mount and projector weight; drop or false ceilings are not supported. The package includes all mounting hardware, so no extra fasteners are required. The custom plate fits only the Infocus models listed above, freeing you from universal-mount compatibility guesswork. Actual plate appearance may differ from product images but will match the specified projectors.

Highlights

  • Compatible with Infocus IN134, IN136 and IN138HD models
  • 100% aircraft-grade 6061-T6 aluminium construction for lasting strength
  • Telescoping extension adjusts 13 to 20 inches from ceiling in 1-inch steps
  • 360-degree rotation with pitch and roll for flexible aiming
  • Lateral shift coupling provides 1-1/2 inches of left/right lens centring

Specifications

TypeProjector Mounts

Questions about this item

How do I set the extension length between 13 and 20 inches during installation?

The telescoping tube adjusts in 1 inch increments; loosen the collar, slide to the desired length, then retighten so the projector sits at the chosen distance from the ceiling.

Will the CNC-machined 6061-T6 aluminum mounting plate or hardware need periodic replacement?

The plate and included hardware are built to last; no scheduled replacement is required under normal indoor use.

How much lateral shift does the coupling provide before the projector can no longer be centred?

The Lateral Shift Coupling allows 1-1/2 inches of left or right adjustment to align the lens with the screen centre.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.