We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount plate with slotted arms and lateral shift coupling, sets projector five inches from ceiling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. INFOCUS-IN1156-SLOTTED projector accessory

SKU CH-Q2EB-JGTXF

Aircraft-aluminium ceiling mount fits Infocus IN1156 and IN1188HD projectors with 360-degree rotation and lateral lens shift

  • TypeProjector Mounts
  • Built to last with 100% 6061-T6 aircraft aluminium construction
  • Rotates 360 degrees plus pitch and roll for flexible aiming
  • Lateral shift coupling provides 1-1/2 inch left-right lens centring
  • CNC machined plate fits Infocus IN1156 and IN1188HD models only
  • Sets projector approximately 5 inches from ceiling with included hardware

Targeted Ceiling Mount

This projector ceiling mount is built specifically for the Infocus IN1156 and IN1188HD models. It positions the projector roughly 5 inches from the ceiling using a custom-machined plate. The design uses 6061-T6 aircraft aluminum for a rigid, long-lasting installation. It is intended for permanent mounting on solid ceilings only.

Adjustable Installation Geometry

A 360-degree rotating coupling allows full yaw control while the Lateral Shift Coupling provides 1-1/2 inches of side-to-side travel to centre the lens. Pitch and roll can be set in any direction for precise image alignment. All required mounting hardware and detailed instructions are included for a straightforward setup. The plate covers minimal surface area to maintain projector ventilation.

Fixed-Distance Rigid Platform

The mount holds the projector at a set 5-inch extension without telescoping movement. Its 6061-T6 aluminum construction resists flex during extended operation. The open plate design lets heat escape freely from the projector chassis. This unit is not designed for drop or false ceilings and fits only the two Infocus models listed.

Highlights

  • Built to last with 100% 6061-T6 aircraft aluminium construction
  • Rotates 360 degrees plus pitch and roll for flexible aiming
  • Lateral shift coupling provides 1-1/2 inch left-right lens centring
  • CNC machined plate fits Infocus IN1156 and IN1188HD models only
  • Sets projector approximately 5 inches from ceiling with included hardware

Specifications

TypeProjector Mounts

Questions about this item

How much lateral adjustment does the Lateral Shift Coupling provide for centering the lens?

The Lateral Shift Coupling allows 1-1/2 inches of left and right lateral adjustment to center the projector lens when the mounting surface is not perfectly aligned with the screen center.

How much heat clearance does the design leave around the projector?

The mount is designed to utilize minimal projector coverage while leaving adequate space for heat to escape during operation.

Which Infocus projector models is this ceiling mount compatible with?

This mount is specifically designed to fit the Infocus IN1156 and IN1188HD projector models listed in the product title.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.