Projector Ceiling Mounts Direct, LLC.
Projector Ceiling Mounts Direct, LLC. INFOCUS-IN1004-SLOTTED projector accessory
Aircraft-aluminium ceiling mount fits Infocus IN1004, IN1014 and IN1024 projectors, sets the unit 5 inches from the ceiling and allows 360-degree rotation with 1.5-inch lateral shift
- TypeProjector Mounts
- Designed for exact fit with Infocus IN1004 IN1014 IN1024 models
- 100% aircraft-grade 6061 aluminum construction ensures lasting durability
- 360-degree rotation plus pitch and roll for flexible aiming
- 5-inch lateral shift centres lens when ceiling is off-centre
- Sets projector approximately 5 inches from ceiling for low-profile install
Designed for Infocus LightPro IN1004 IN1014 IN1024
This ceiling mount is engineered exclusively for Infocus LightPro Advanced models IN1004, IN1014 and IN1024. The CNC-machined plate matches the projector's mounting points precisely, leaving room for heat to escape. It is not a universal bracket and will not fit other projectors.
Hardware and adjustment included
All screws, washers and detailed instructions are supplied for a single-person installation. The Lateral Shift Coupling provides 1-1/2 inches of side-to-side travel to centre the lens when the ceiling joist is off-axis. The arm rotates 360 degrees and tilts in any direction for image alignment.
Aircraft-grade aluminium, fixed 5-inch drop
The entire mount is machined from 6061-T6 aluminium for rigidity and corrosion resistance. The design positions the projector roughly 5 inches below the ceiling surface, making it unsuitable for drop or false ceilings. The plate you receive may look different from photographs but will fit only the three listed models.
Highlights
- Designed for exact fit with Infocus IN1004 IN1014 IN1024 models
- 100% aircraft-grade 6061 aluminum construction ensures lasting durability
- 360-degree rotation plus pitch and roll for flexible aiming
- 5-inch lateral shift centres lens when ceiling is off-centre
- Sets projector approximately 5 inches from ceiling for low-profile install
Specifications
| Type | Projector Mounts |
|---|
Questions about this item
Will the aluminium plate or mounting hardware need replacement over time?
The mount uses 6061-T6 aircraft aluminium and all supplied hardware, so no scheduled replacement is required under normal indoor use.
What limits how far the projector can shift sideways during a long installation?
The Lateral Shift Coupling provides 1-1/2 inches of left-right adjustment; that is the maximum lateral travel.
How much heat builds up around the mount when the projector runs all day?
The plate is CNC machined with minimal coverage, leaving open space for the projector’s own exhaust to escape freely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
