We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Projector ceiling mount, silver aluminium, 10-inch extension arm

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. HITACHI-CP-A52-MM-10EXT projector accessory

SKU CH-DE2S-W00EX

Ceiling mount positions Hitachi CP-A52, CP-A100 and CP-A200 projectors 10 inches from the ceiling with 360-degree rotation and ±80-degree tilt.

  • TypeProjector Mounts
  • Sets projector 10 inches from ceiling for optimal placement
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • Rotates 360 degrees with ±80-degree tilt for flexible aiming
  • Includes all hardware and instructions for quick drywall or beam mounting
  • Designed exclusively for Hitachi CP-A52 CP-A100 CP-A200 models

Precision Fit for Hitachi CP-A52 CP-A100 CP-A200

This ceiling mount is engineered exclusively for the Hitachi CP-A52 CP-A100 and CP-A200 projector models. It replaces universal brackets with a CNC-machined plate that matches the mounting points of these specific units. Installers gain a secure, model-specific attachment without adapting generic hardware. The projector itself is not included.

10 Inch Extension with Full Articulation

The arm positions the projector approximately 10 inches from the ceiling surface. A 360 degree rotation joint combines with tilt and roll adjustment up to 80 degrees off vertical. This range covers angled ceilings and off-centre screen alignment while keeping the projector close to the mounting plane. The design leaves open space around the chassis for heat dissipation.

Upgrade from Universal Mounts for Listed Models

Buyers replacing a universal mount eliminate the need for adapter plates and the wobble that comes with generic hole patterns. The aircraft-grade 6061-T6 aluminium construction resists flex under the projector's weight. This mount is not intended for drop or false ceilings and will not fit any projector outside the three listed models.

Highlights

  • Sets projector 10 inches from ceiling for optimal placement
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • Rotates 360 degrees with ±80-degree tilt for flexible aiming
  • Includes all hardware and instructions for quick drywall or beam mounting
  • Designed exclusively for Hitachi CP-A52 CP-A100 CP-A200 models

Specifications

TypeProjector Mounts

Questions about this item

Will this mount clear the low-profile lens on my CP-A52 when installed 10 inches from the ceiling?

The CNC-machined plate is tailored to the CP-A52, CP-A100 and CP-A200, keeping the projector 10 inches down while leaving space for heat and lens clearance.

How can I verify the 360-degree rotation and ±80-degree tilt are functioning after installation?

Rotate the arm through a full 360 degrees and pitch it forward and back to the 80-degree stops; smooth movement at both extremes confirms the joints are working.

Does the box contain every screw and anchor needed for a drywall ceiling, or must I buy extra hardware?

All necessary hardware for drywall or wooden-beam mounting is included, along with detailed instructions; no separate fasteners are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.