We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping pole and adjustable projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-VS230-LAT-13 projector accessory

SKU CH-FZM4-N91F6

Ceiling mount with 13–20 in telescoping extension, 360° rotation and lateral shift for Epson VS230, VS240, VS330, VS335W, VS340, VS345

  • TypeProjector Mounts
  • Precise fit for Epson VS230 VS240 VS330 VS335 VS340 VS345 projectors
  • 100% 6061-T6 aircraft aluminium ensures lasting strength
  • Telescoping extension sets projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll for flexible aiming
  • Lateral shift coupling allows left-right adjustment for centred image

Epson VS-Series Ceiling Mount

This projector ceiling mount is built specifically for Epson VS230 VS240 VS330 VS335W VS340 and VS345 models. It uses a model-specific plate machined from 6061-T6 aircraft aluminum to ensure a precise fit. The design leaves room around the projector for heat to escape during operation. It is intended for solid ceiling installations only, not for drop or false ceilings.

Lateral Shift and 360 Rotation Under Load

The mount provides 360-degree rotation plus pitch and roll adjustment so the image stays aligned even after the projector warms up. A lateral shift coupling gives 1-1/2 inches of side-to-side travel to centre the lens when the ceiling joist is off-centre. The telescoping extension locks in 1 inch increments between 13 and 20 inches from the ceiling, keeping the projector stable during extended use. All movement points are secured with included hardware so the position holds over time.

Aircraft Aluminum Build and Daily Mounting

The CNC machined 6061-T6 aluminum plate and arm resist flexing when the projector is adjusted or serviced. Every bolt and spacer needed for installation ships in the box with detailed instructions for a quick setup. The projector plate you receive may look different from product photos but will match the listed Epson models exactly. This mount cannot be used with suspended ceiling grids or any projector outside the named VS series.

Highlights

  • Precise fit for Epson VS230 VS240 VS330 VS335 VS340 VS345 projectors
  • 100% 6061-T6 aircraft aluminium ensures lasting strength
  • Telescoping extension sets projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll for flexible aiming
  • Lateral shift coupling allows left-right adjustment for centred image

Specifications

TypeProjector Mounts

Questions about this item

How much heat clearance does the CNC-machined 6061-T6 plate leave around the Epson VS230?

The plate is designed for minimal coverage so adequate space remains for heat to escape from the projector.

What tools or extra parts are needed before mounting the EPSON-VS230-LAT-13?

All necessary hardware and detailed instructions are included in the box for installation.

Will this mount still fit if I keep my older Epson VS335W projector?

Yes, the mount is specifically designed for the VS335W along with the VS230, VS240, VS330, VS340 and VS345 models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.