We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with adjustable arm extending ten inches from base plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-PLS18-MM-10EXT projector accessory

SKU CH-FYHB-4WA2G

Ceiling mount positions compatible Epson PowerLite projectors 10 inches down with 360-degree rotation and 80-degree tilt

  • TypeProjector Mounts
  • Sets projector 10 inches from ceiling for optimal positioning
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • 360-degree rotation plus ±80-degree tilt for flexible aiming
  • Model-specific design fits Epson 1266, 1286, S18+, W15+, W18+, X24+ only
  • All mounting hardware and detailed instructions included for quick installation

Projector Ceiling Mount for Epson PowerLite Models

This ceiling mount is designed exclusively for Epson PowerLite 1266, 1286, S18+, W15+, W18+, and X24+ projectors. It provides a dedicated mounting solution that ensures a precise fit using minimal projector coverage. The CNC-machined mounting plate is constructed from 6061-T6 aircraft aluminum for lasting durability. All necessary installation hardware and detailed instructions are included for drywall or wooden beam attachment.

360-Degree Rotation with 80-Degree Tilt Range

The mount offers full 360-degree rotation along with pitch and roll adjustment in any direction. Maximum tilt reaches +/- 80 degrees to accommodate various viewing angles. The design positions the projector approximately 10 inches from the ceiling surface. This spacing leaves adequate room for heat to escape during operation. The unit is not intended for drop or false ceiling installations.

Custom Plate Frees Projector Vents and Ports

Because the mounting plate is made specifically for the listed models, it avoids blocking ventilation paths or connection ports. Builders gain a secure attachment point without covering critical airflow areas on the projector chassis. The included hardware kit supports direct installation onto structural ceiling materials. Projector is not included with the mount.

Highlights

  • Sets projector 10 inches from ceiling for optimal positioning
  • CNC-machined 6061-T6 aircraft aluminium plate ensures precise fit
  • 360-degree rotation plus ±80-degree tilt for flexible aiming
  • Model-specific design fits Epson 1266, 1286, S18+, W15+, W18+, X24+ only
  • All mounting hardware and detailed instructions included for quick installation

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the 10-inch extension to a drywall ceiling and which step is often missed?

Fasten the included ceiling bracket to a joist or use the supplied drywall anchors, then bolt the 100% 6061-T6 aircraft aluminum extension column to the bracket before attaching the projector plate; the step most people skip is confirming the bracket hits solid wood instead of only drywall.

What part of the mount will need checking or replacement after long-term use?

Re-torque the four pivot bolts that allow 360-degree rotation and ±80-degree tilt every six to twelve months, because vibration from the projector fan can loosen them; the 6061-T6 aluminum arms themselves do not fatigue under normal conditions.

At what tilt angle does the mount reach its mechanical limit during daily adjustment?

The CNC-machined pivot stops at ±80 degrees from level, so the projector cannot be aimed steeper than that without hitting the hard stop.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.