We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium telescoping ceiling mount, extends 13 to 20 inches

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-PLPG5150NL-LAT-13 Projector Accessory 13-20in Extension

SKU CH-3FJS-E3XSG

A telescoping ceiling mount positions compatible Epson PowerLite Pro projectors 13 to 20 inches from the ceiling with 360-degree rotation and lateral shift adjustment

  • TypeProjector Mounts
  • Telescopic range positions the projector 13 to 20 inches from the ceiling
  • Aircraft-grade 6061-T6 aluminium construction ensures a rigid, long-lasting mount
  • 360-degree rotation plus full pitch and roll adjustment for precise image alignment
  • 5-inch lateral shift coupling centres the lens when the ceiling mount is off-centre
  • CNC-machined plate tailored exclusively for Epson PowerLite Pro G5150NL, G5200WNL and G5350NL projectors

Epson G-Series Projector Mount

This aluminium ceiling mount is engineered specifically for Epson PowerLite Pro G5150NL, G5200WNL and G5350NL projectors. The CNC-machined plate attaches directly to the projector chassis without universal adapters, preserving ventilation space around the unit. All mounting hardware and illustrated instructions are included for a single-person installation.

13-to-20-Inch Telescoping Extension

The column extends in one-inch steps from 13 inches to 20 inches below the ceiling, replacing fixed-length arms that cannot match varying ceiling heights. A lateral-shift coupling provides 1-1/2 inches of side-to-side travel to centre the lens when the joist line falls off the screen axis. The assembly rotates a full 360 degrees and tilts in any direction for precise image alignment.

Sustained Overhead Support

Aircraft-grade 6061-T6 aluminium resists flex and creep under the projector's continuous weight, unlike lighter alloys that can sag over months of use. The design is rated for solid structural ceilings only and is not intended for drop or false-ceiling grids. Buyers needing a shorter drop, a different projector footprint or a suspended-ceiling kit will need a separate mounting solution.

Highlights

  • Telescopic range positions the projector 13 to 20 inches from the ceiling
  • Aircraft-grade 6061-T6 aluminium construction ensures a rigid, long-lasting mount
  • 360-degree rotation plus full pitch and roll adjustment for precise image alignment
  • 5-inch lateral shift coupling centres the lens when the ceiling mount is off-centre
  • CNC-machined plate tailored exclusively for Epson PowerLite Pro G5150NL, G5200WNL and G5350NL projectors

Specifications

TypeProjector Mounts

Questions about this item

How far from the ceiling does the 13-20in telescoping extension position the Epson PowerLite Pro G5150NL?

The extension sets the projector approximately 13 to 20 inches from the ceiling, adjustable in 1 inch increments using the telescoping tube.

What hardware and steps are needed to install the mount on a solid ceiling for the G5200WNL?

All necessary hardware is included; secure the ceiling plate to a structural joist, attach the telescoping column, then fasten the CNC-machined 6061-T6 projector plate — do not use on drop or false ceilings.

Will the projector plate for the G5350NL need replacement if I remount the unit later?

The 6061-T6 aircraft aluminum plate is built to last and designed for the listed models only; it does not require scheduled replacement under normal use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.