We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping arm and projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-PLPC9700-LAT-13 projector accessory

SKU CH-3CVH-V0T13

Aircraft-aluminium ceiling mount positions Epson PowerLite Pro Cinema 9700 projectors 13 to 20 inches down with 360-degree rotation and lateral shift

  • TypeProjector Mounts
  • 100 % aircraft-grade 6061-T6 aluminium for lasting rigidity
  • Telescoping arm adjusts 13 to 20 inches in one-inch steps
  • 360-degree rotation plus pitch and roll for precise aiming
  • Lateral shift coupling gives 1-1/2 inches of side-to-side lens centring
  • CNC-machined plate fits Epson PowerLite Pro Cinema 9700 and 9700UB only

Aircraft-Grade Projector Mount

The EPSON-PLPC9700-LAT-13 is a ceiling mount built specifically for Epson PowerLite Pro Cinema 9700 and 9700UB projectors. It uses 100% 6061-T6 aircraft aluminum construction with a CNC-machined mounting plate for precise fitment. The design minimises coverage of the projector chassis to preserve airflow and heat dissipation. All necessary installation hardware and detailed instructions are included in the package.

Installers Needing Lateral Lens Alignment

This mount suits installers who require up to 1-1/2 inches of left-right lateral shift to centre the lens when the ceiling mounting point is off-axis. The 360-degree rotation plus pitch and roll adjustment provide full positional flexibility. Buyers with different projector models should look elsewhere, as the plate fits only the 9700 series listed. It is also not intended for drop or false ceiling installations, so those projects need a different solution.

Check Ceiling Structure and Clearance

Verify that your ceiling can support a solid mount and that the 13 to 20 inch telescoping extension range places the projector at the correct throw distance for your screen. The extension adjusts in 1 inch increments within that span. Confirm the projector is a PowerLite Pro Cinema 9700 or 9700UB, as the custom plate will not fit other models. Ensure the mounting location allows the required lateral shift travel if the ceiling joist is offset from the screen centre.

Highlights

  • 100 % aircraft-grade 6061-T6 aluminium for lasting rigidity
  • Telescoping arm adjusts 13 to 20 inches in one-inch steps
  • 360-degree rotation plus pitch and roll for precise aiming
  • Lateral shift coupling gives 1-1/2 inches of side-to-side lens centring
  • CNC-machined plate fits Epson PowerLite Pro Cinema 9700 and 9700UB only

Specifications

TypeProjector Mounts

Questions about this item

What ceiling structure do I need to attach the EPSON-PLPC9700-LAT-13 mount securely?

The mount is designed for solid ceiling joists or concrete and includes all necessary hardware; it is not intended for drop or false ceilings.

Will the Epson PowerLite Pro Cinema 9700UB still have enough airflow when mounted 13 to 20 inches below the ceiling?

The CNC-machined plate uses minimal coverage and the lateral shift coupling leaves open space around the vents so heat can escape normally.

How do I confirm the lateral shift coupling is centred after installation?

Adjust the coupling until the projector lens lines up with the screen centre, then lock the 1-1/2 inch travel in place.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.