We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with a 10-inch extension arm and CNC-machined mounting plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-PLHC5010e-MM-10EXT projector accessory 10 in extension

SKU CH-DCS2-C70KY

A 10-inch aluminium extension mount designed exclusively for Epson PowerLite Home Cinema 5010e, 5020, 5020e and 5020UB projectors, offering 360-degree rotation and ±80-degree tilt

  • TypeProjector Mounts
  • Sets projector 10 inches from ceiling for optimal clearance
  • 360-degree rotation plus ±80° tilt enables precise image alignment
  • 100% 6061-T6 aircraft aluminum construction ensures rigid, lasting support
  • CNC-machined plate fits Epson 5010e 5020 5020e 5020UB models exactly
  • All hardware and detailed instructions included for quick installation

Compatible Epson Home Cinema Models

This ceiling mount is engineered for the Epson PowerLite Home Cinema 5010e, 5020, 5020e and 5020UB projectors. The CNC-machined mounting plate ensures a precise fit for these specific models only. All required installation hardware and detailed instructions are included in the package. The projector itself is not supplied with the mount.

Aircraft Aluminium Build and Clearance

The mount body is constructed from 100 percent 6061-T6 aircraft aluminium for durability. It positions the projector approximately 10 inches from the ceiling surface, providing space for heat to escape during operation. The design uses minimal projector coverage to maintain adequate ventilation. This unit is not intended for drop or false ceiling installations.

360-Degree Rotation and Tilt Range

The assembly rotates a full 360 degrees and offers a maximum tilt of plus or minus 80 degrees for flexible aiming. Pitch and roll adjustments allow precise image alignment in any direction. The fixed 10-inch extension length determines the final projector height from the ceiling. Buyers needing a different drop distance or a universal mounting solution should consider alternative products.

Highlights

  • Sets projector 10 inches from ceiling for optimal clearance
  • 360-degree rotation plus ±80° tilt enables precise image alignment
  • 100% 6061-T6 aircraft aluminum construction ensures rigid, lasting support
  • CNC-machined plate fits Epson 5010e 5020 5020e 5020UB models exactly
  • All hardware and detailed instructions included for quick installation

Specifications

TypeProjector Mounts

Questions about this item

How do I attach the 10-inch extension to my ceiling and which step is most often missed?

Secure the ceiling plate to a joist or solid drywall anchor using the supplied lag bolts, then fasten the projector-specific plate with the included hardware; the step most often missed is confirming the joist location before drilling.

What part of this mount will need checking or replacement after extended use?

The 6061-T6 aluminium arms and CNC plate are corrosion-resistant, so only the steel mounting bolts should be inspected periodically and retorqued if they loosen from vibration.

At what tilt angle does the mount reach its mechanical limit during daily adjustment?

The ball-joint design allows a maximum tilt of ±80 degrees from vertical, which is the hard stop before the projector housing would contact the extension tube.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.