We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-EMP-1810-LAT-13 projector accessory

SKU CH-MY1Q-MTVH3

Ceiling mount for Epson EMP-1810, 1815, 30, 52, 62 and 82 projectors, with 13 to 20 inch telescoping extension, 360-degree rotation and 1-1/2 inch lateral shift

  • TypeProjector Mounts
  • Designed for Epson EMP-1810, 1815, 30, 52, 62, 82 projectors
  • Telescoping extension positions projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll adjustment for image alignment
  • 100% 6061-T6 aircraft aluminium construction for lasting durability
  • Lateral shift coupling provides 1-1/2 inches of side-to-side lens centring

Ceiling Mount for Epson Projectors

This aluminium ceiling mount is built for Epson EMP-1810, EMP-1815, EMP-30, EMP-52, EMP-62 and EMP-82 projectors. It uses a CNC-machined plate that matches the mounting holes on those models only. The 6061-T6 aircraft-grade construction resists flex during permanent installation. Installers who need a model-specific fit rather than a universal bracket will find the plate covers minimal projector surface area.

Sustained Thermal Clearance and Adjustment

The open plate design leaves space for projector exhaust heat to escape continuously during long presentations. A lateral shift coupling provides 1-1/2 inches of side-to-side travel to centre the lens when the ceiling joist is off-axis. The telescoping column locks in one-inch increments from 13 to 20 inches, holding position without drift under the projector's weight. The mount rotates 360 degrees and tilts in any direction for precise image alignment.

Fixed Extension Range and Ceiling Type Limit

The column cannot be shortened below 13 inches or extended past 20 inches, so rooms needing a flush mount or a longer drop require a different solution. Hardware and instructions are included for direct attachment to structural ceilings only. The design is not rated for suspended or false ceiling grids. The mounting plate supplied may differ from product images but will fit the listed Epson models exclusively.

Highlights

  • Designed for Epson EMP-1810, 1815, 30, 52, 62, 82 projectors
  • Telescoping extension positions projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll adjustment for image alignment
  • 100% 6061-T6 aircraft aluminium construction for lasting durability
  • Lateral shift coupling provides 1-1/2 inches of side-to-side lens centring

Specifications

TypeProjector Mounts

Questions about this item

Does the 360-degree rotation and pitch-roll movement trap heat against the EMP-1810 chassis?

The CNC-machined 6061-T6 aluminium plate is shaped for minimal coverage, leaving open space around the projector so warm air can escape freely even when the unit is angled.

What must I already own to install the EPSON-EMP-1810-LAT-13 mount on a solid ceiling?

You need a concrete or wood ceiling structure plus standard tools — drill, bits, wrench — because the kit supplies every bracket, bolt and the 1-1/2 inch lateral-shift coupling but no anchors for hollow ceilings.

Will this mount still fit if I later replace the EMP-1810 with an older EMP-30 or EMP-82 unit?

Yes, the same machined plate and telescoping 13-to-20-inch extension are built for the EMP-30, EMP-52, EMP-62 and EMP-82 models as well as the 1810 and 1815.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.