We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping arm and projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-EH-TW9100-LAT-13 projector accessory

SKU CH-9JMV-F5S9Z

Ceiling mount for Epson 9100 and 9200 series projectors, telescopes 13 to 20 inches with 360-degree rotation and 1.5-inch lateral shift, built from 6061 aircraft aluminum

  • TypeProjector Mounts
  • Compatible with Epson EH-TW9100, EH-TW9100W, EH-TW9200, EH-TW9200W projectors
  • Extends 13 to 20 inches from ceiling in 1-inch increments
  • Rotates 360 degrees with pitch and roll for flexible positioning
  • 5-inch lateral shift centres lens on off-centre mounts
  • Built from 6061-T6 aircraft-grade aluminium with CNC-machined plate

Ceiling mount for Epson home-cinema projectors

This ceiling mount is built specifically for the Epson EH-TW9100, EH-TW9100W, EH-TW9200 and EH-TW9200W models. It uses a CNC-machined plate made from 6061-T6 aircraft-grade aluminium to ensure a precise fit. All required hardware and detailed instructions are included for straightforward installation. The mount is not intended for drop or false ceilings.

Telescoping extension sets 13 to 20 inches

The single specification that decides fit is the telescoping extension, which positions the projector approximately 13 inches to 20 inches away from the ceiling in 1 inch increments. A lateral shift coupling provides 1-1/2 inches of left and right adjustment to centre the lens when the mounting surface is off-centre. The mount rotates 360 degrees and allows pitch and roll in any direction.

Aircraft aluminium construction handles sustained

The 6061-T6 aluminium frame supports the projector continuously without flex, keeping the optical path stable during long viewing sessions. Minimal projector coverage leaves adequate space for heat to escape, so thermal performance remains consistent over extended use. The fixed plate and coupling maintain alignment without drift once tightened.

Highlights

  • Compatible with Epson EH-TW9100, EH-TW9100W, EH-TW9200, EH-TW9200W projectors
  • Extends 13 to 20 inches from ceiling in 1-inch increments
  • Rotates 360 degrees with pitch and roll for flexible positioning
  • 5-inch lateral shift centres lens on off-centre mounts
  • Built from 6061-T6 aircraft-grade aluminium with CNC-machined plate

Specifications

TypeProjector Mounts

Questions about this item

How far down from the ceiling will the projector hang with this mount?

The telescoping extension sets the projector roughly 13 to 20 inches from the ceiling in 1 inch increments.

What rotation and tilt range does the mount allow once installed?

It can be rotated 360 degrees and pitched or rolled in any direction for flexible aiming.

How much side-to-side lens shift does the Lateral Shift Coupling provide?

The Lateral Shift Coupling gives 1-1/2 inches of left/right adjustment to centre the lens.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.