We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium telescopic projector ceiling mount with lateral shift coupling, extends 13 to 20 inches

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-EB-X27-LAT-13 projector accessory 13-20 inch extension

SKU CH-B5W9-5PFG7

Telescoping ceiling mount positions compatible Epson projectors 13 to 20 inches from the ceiling with 360-degree rotation and lateral lens shift

  • TypeProjector Mounts
  • Telescopes 13 to 20 inches from ceiling in one-inch steps
  • CNC-machined 6061-T6 aircraft aluminium plate fits Epson EB-X27, EB-X29, EB-X30, EB-X31, EB-X300, EB-X350 only
  • 360-degree rotation with full pitch and roll adjustment
  • 1-1/2 inch lateral shift coupling centres lens when ceiling is off-centre
  • All mounting hardware and detailed instructions included for quick installation

Compatible Epson Models

This ceiling mount is built specifically for Epson EB-X27, EB-X29, EB-X30, EB-X300, EB-X31 and EB-X350 projectors. It will not fit other models, so buyers with different projectors need a different mount. The CNC-machined plate ensures precise fitment for the listed units only.

Telescoping Range and Heat Clearance

The extension adjusts from 13 to 20 inches in one-inch increments, positioning the projector away from the ceiling. This spacing leaves adequate room for heat to escape during operation. The mount is not intended for drop or false ceilings, limiting installation options.

Aircraft Aluminum Build and Adjustment

The mount uses 100 percent 6061-T6 aircraft aluminum for durability. A lateral shift coupling provides 1-1/2 inches of left-right adjustment to centre the lens when the mounting surface is off-centre. Full 360-degree rotation plus pitch and roll allow precise image alignment. All necessary hardware and detailed instructions are included.

Highlights

  • Telescopes 13 to 20 inches from ceiling in one-inch steps
  • CNC-machined 6061-T6 aircraft aluminium plate fits Epson EB-X27, EB-X29, EB-X30, EB-X31, EB-X300, EB-X350 only
  • 360-degree rotation with full pitch and roll adjustment
  • 1-1/2 inch lateral shift coupling centres lens when ceiling is off-centre
  • All mounting hardware and detailed instructions included for quick installation

Specifications

TypeProjector Mounts

Questions about this item

How do I install the 13 to 20 inch telescoping extension and what step is often missed?

Attach the CNC-machined projector plate to the Epson EB-X27, EB-X29, EB-X30, EB-X31, EB-X300 or EB-X350, then secure the 6061-T6 aircraft aluminum extension column to the ceiling joist. The step most often missed is using the 1-1/2 inch lateral shift coupling to centre the lens before tightening the 360-degree rotation and pitch locks.

What maintenance or replacement will this mount need over time?

The 6061-T6 aluminum construction resists corrosion, so no scheduled replacement is required. Periodically check that the telescoping extension bolts, the lateral shift coupling set screws and the ceiling anchor hardware remain tight after thermal cycling from projector heat.

What limit appears first when the projector runs continuously on this mount?

The mount itself has no thermal or mechanical duty cycle limit. The practical limit is the projector's own heat dissipation; the design leaves open space around the EB-X27, EB-X29, EB-X30, EB-X31, EB-X300 or EB-X350 chassis so airflow is not restricted by the 100% aluminum plate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.