We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-EB-5510-LAT-13 projector accessory

SKU CH-RV7P-G58CM

Ceiling mount for Epson EB-5510, 5520W, 5530U, 5535U projectors with 13 to 20 inch telescoping extension, 360-degree rotation and lateral shift adjustment

  • TypeProjector Mounts
  • Designed for Epson EB-5510, 5520W, 5530U, 5535U projectors
  • 100% 6061-T6 aircraft aluminium construction for lasting durability
  • Telescoping extension sets projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll for flexible positioning
  • Lateral shift coupling provides 1-1/2 inches of left/right lens centring

Epson EB-5510 Mount with 13-20 Inch Extension

This projector ceiling mount is built specifically for the Epson EB-5510, 5520W, 5530U and 5535U models. It uses 100% 6061-T6 aircraft aluminum construction for a rigid, durable hold. The CNC-machined mounting plate matches only the listed projectors, leaving space for heat to escape. Installers who need a model-specific bracket rather than a universal kit will find it a direct fit.

Lateral Shift Coupling and 360 Degree Rotation

The mount includes a Lateral Shift Coupling that provides 1-1/2 inches of left-right adjustment to centre the lens when the ceiling joist is off-centre. The arm rotates 360 degrees and allows pitch and roll in any direction for precise image alignment. All necessary mounting hardware and detailed instructions are supplied in the box, so no extra parts are required to complete the installation.

Telescoping Arm Set in One Inch Steps

The telescoping extension locks the projector approximately 13 to 20 inches from the ceiling in one inch increments, giving a narrow range of drop lengths. The design is not intended for drop or false ceilings, so installers working with suspended grids will need a different solution. Because the plate is made only for the four Epson models listed, it will not fit any other projector even if the bolt pattern looks similar.

Highlights

  • Designed for Epson EB-5510, 5520W, 5530U, 5535U projectors
  • 100% 6061-T6 aircraft aluminium construction for lasting durability
  • Telescoping extension sets projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll for flexible positioning
  • Lateral shift coupling provides 1-1/2 inches of left/right lens centring

Specifications

TypeProjector Mounts

Questions about this item

Does the aircraft-aluminium construction require any periodic tightening or lubrication?

The mount is built from 6061-T6 aircraft-grade aluminium with no moving parts that need lubrication; only the initial installation torque on the supplied hardware is required.

How far from the ceiling can the projector sit before the telescoping extension reaches its limit?

The telescopic column adjusts in 1-inch steps and stops at 20 inches, so the projector cannot be positioned farther from the ceiling than that.

Will the mount transmit noticeable vibration or heat from the projector to the ceiling during all-day operation?

The rigid 6061-T6 aluminium frame and open mounting plate design let projector heat escape freely while adding no fan or motor noise of its own.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.