We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm extending 13 to 20 inches

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-EB-1750-LAT-13 projector accessory

SKU CH-0A8Z-8EHXJ

Ceiling mount for Epson EB-1750, EB-1751, EB-1760W, EB-1761W and EB-1770W projectors with 13–20 inch telescopic extension and 360-degree rotation

  • TypeProjector Mounts
  • Secure fit for Epson 1750, 1751, 1760, 1761, 1770 models
  • Aircraft-grade 6061-T6 aluminum ensures lasting durability
  • Telescoping arm adjusts 13 to 20 inches in 1-inch steps
  • Full 360-degree rotation with pitch and roll flexibility
  • Lateral shift coupling adds 1-1/2 inches side-to-side lens centring

Direct ceiling mount for Epson EB-1750 series

This new projector accessory is a dedicated ceiling mount built from 100% 6061-T6 aircraft aluminium. It is designed to fit the Epson EB-1750, EB-1751, EB-1760W, EB-1761W and EB-1770W models precisely. The CNC-machined mounting plate ensures a secure fit while leaving adequate space for heat to escape. All necessary hardware and detailed instructions are included for straightforward installation.

Suited for fixed installations on solid ceilings

The mount provides 360-degree rotation plus pitch and roll adjustment, with a lateral shift coupling that allows 1-1/2 inches of left/right lens centring. This makes it ideal where the mounting surface is not perfectly aligned with the screen centre. It is not intended for drop or false ceilings, so installers working with suspended grid systems should look at other solutions.

Telescoping extension range 13 to 20 inches

The single specification that decides fit is the extension length, which sets the projector approximately 13 to 20 inches from the ceiling in 1 inch increments. If the required drop distance falls outside this range, this mount will not meet the installation need.

Highlights

  • Secure fit for Epson 1750, 1751, 1760, 1761, 1770 models
  • Aircraft-grade 6061-T6 aluminum ensures lasting durability
  • Telescoping arm adjusts 13 to 20 inches in 1-inch steps
  • Full 360-degree rotation with pitch and roll flexibility
  • Lateral shift coupling adds 1-1/2 inches side-to-side lens centring

Specifications

TypeProjector Mounts

Questions about this item

Which Epson projectors does the EPSON-EB-1750-LAT-13 mount fit?

It fits the EB-1750, EB-1751, EB-1760W, EB-1761W and EB-1770W models only. The CNC-machined plate is made for those projectors and will not fit others.

How far below the ceiling will the projector sit once installed?

The telescoping extension positions the projector 13 to 20 inches from the ceiling in 1 inch increments, so you can set the exact drop you need.

What does the 360 degree rotation and lateral shift allow in practice?

You can rotate the mount a full 360 degrees and shift the projector 1-1/2 inches left or right to centre the lens when the ceiling mount point is off-centre.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.